- Lattice ECP5 LFE5U-25F-6BG256C (product page)
- Winbond 25Q32JVSIQ, 32 Mbits SPI flash (datasheet)
- 2x Broadcom B50612D Gigabit Ethernet PHYs (datasheet)
- 2x ESMT M12L16161A-5T 1M x 16bit 200MHz SDRAMs (organized as 1M x 32bit) (datasheet)
- 12x 74HC245T Octal Bidirectional Transceiver (used for level translation to 5V)
links
chubby75
- https://github.com/q3k/chubby75/tree/master/5a-75b
- upstream: https://github.com/tomverbeure/chubby75/tree/5a-75b/5a-75b
- upstream for v7 board: https://github.com/miek/chubby75/blob/5a-75b-v7_pinout/5a-75b/hardware_V7.0.md
original protocol
- send data to original fpga image: https://github.com/FalconChristmas/fpp/blob/master/src/channeloutput/ColorLight-5a-75.cpp
replace level shifters to get input
https://twitter.com/Claude1079/status/1231194849350647808
SN74CBT3245APW 8bit bidirectional FET switches
QS3245QG
chiselwatt
https://github.com/antonblanchard/chiselwatt/commit/5a7fcbc8142ed2b390e1f8bfaaa801fe09a60351
UART RX is on J19, labelled key+ on the silk screen on the back
UART TX is on J1, pin 1.
LOCATE COMP "clock" SITE "P6";
LOCATE COMP "io_tx" SITE "F3";
LOCATE COMP "io_rx" SITE "M13";
litex
basic example of litex on colorLight 5A-75B based on fpga_101/lab004
https://github.com/trabucayre/litexOnColorlightLab004/
https://github.com/NiklasFauth/colorlight-led-cube
fpga pin mapping
https://twitter.com/adamgreig/status/1297255957320421383
I don't want to load a new image onto this totally blind, so I used the prjtrellis tools (https://github.com/YosysHQ/prjtrellis/) to write a script (https://github.com/adamgreig/cl/blob/master/pins.py) which works out input/output/bidi for all pins used in any ECP5 bitstream. It found only one unused pin...
