2.2 TFT LCD: TFT01-2.2SP

http://www.elecfreaks.com/estore/2-2-tft-lcd-tft01-2-2sp.html
http://www.elecfreaks.com/wiki/index.php?title=2.2S%22_TFT_LCD:_TFT01-2.2S

ILI9341 (or ILI9340 according to tftfb)

RaspberryPi

https://github.com/notro/fbtft/wiki
https://hackaday.io/project/6157/instructions

• VCC to 3.3 volt (pin 17)
• GND to GND (pin 20)
• CS to CE0 (pin 24)
• RESET to GPIO 25 (pin 22)
• D/C to GPIO 24 (pin 18)
• SDI/MOSI to MOSI (pin 19)
• SCK to SCLk (pin 23)
• LED to GPIO18 (pin 12)
• SDO/MISO to MISO (pin 21)

# enable spi in raspi-config

pi@jpi1 ~ $ grep spi /boot/config.txt 
dtparam=spi=on


sudo REPO_URI=https://github.com/notro/rpi-firmware rpi-update

sudo reboot


pi@jpi1 ~ $ sudo modprobe fbtft_device name=adafruit22a verbose=1

pi@jpi1 ~ $ dmesg | tail -8
[  173.796933] fbtft_device: Deleting spi0.0
[  173.797590] spi spi0.0: setting up native-CS0 as GPIO 8
[  173.797807] fbtft_device:  GPIOS used by 'adafruit22a':
[  173.797833] fbtft_device:    'reset' = GPIO25
[  173.797851] fbtft_device:    'dc' = GPIO24
[  173.797864] fbtft_device:    'led' = GPIO18
[  173.838265] fb_ili9340: module is from the staging directory, the quality is unknown, you have been warned.
[  174.220426] graphics fb1: fb_ili9340 frame buffer, 240x320, 150 KiB video memory, 4 KiB DMA buffer memory, fps=20, spi0.0 at 32 MHz

pi@jpi1 ~ $ fbset -fb /dev/fb1

mode "240x320"
    geometry 240 320 240 320 16
    timings 0 0 0 0 0 0 0
    nonstd 1
    rgba 5/11,6/5,5/0,0/0
endmode

pi@jpi1 ~ $ cat /dev/urandom > /dev/fb1 
cat: write error: No space left on device



# test
cd /usr/share/X11/xorg.conf.d/
sudo mv 99-fbturbo.conf ~/
FRAMEBUFFER=/dev/fb1 startx