service menu
https://wiki.samygo.tv/index.php?title=Service_Menu
Enter service menu: UE,LE models:INFO MENU MUTE POWER
This has to be pressed fast, within second or two. To disable sound, select HDMI input.
T-MST10PDEUC-2007.0 T-MST10PDEUS-1002 E-Manual:XTDVBEUE-1042 EDID SUCCESS HDCP SUCCESS CALIB: AV / COMP / PC / HDMI / Option: 40A6AF0D,EU,5450,NONE FactoryCS: 0x5ce5c95 T-MSXDEUCIP-1000 Onboot : 1003 SDAL-3.63.0.0 RFS:*X10P 0072 2016-04-01 FUNC-TAG-ERR Type: 40A6AF0D Model: UE40EH5450 Wired MAC ---- CIP SUCCESS DRM : ---- Factory Data Ver : 216 EERC Version : 2124 DTP-AP-COMP-945-X10P_DEU-107 DTP-BP-HAL-0381-X10P_DEU-204-01 DTP-BP-0874-42 POP-FLA-12-0009.19 Date of purchase : 1/4/2019
Sigh, I did reset with default PIN 0000 before entering service menu, so counter and date is reset.
I also changed Control > Sub Option > RS-232 Jack -> Debug
Ex-Link Cable (service port TTL serial)
https://wiki.samygo.tv/index.php?title=Ex-Link_Cable_for_C/D/E_Series_and_BD_players
3.5mm jack "service" on TV:
- 1 - tip - Tx
- 2 - ring - Rx
- 3 - ring - GND
If you have TRRR jack, just use first three pins. Others are not connected to anything in TV.
To find ground pin check continuity between your jack breakout and USB connector. One you found
ground, pins from it towards tip are Rx and Tx.
I also measured Rx and Tx pins which where around 3.3V, so safe to connect to usb serial.
dump of serial console
It's 115200 8n1 3.3V serial console:
samsung-UE40EH5450-serial.txt.gztop-debug menu
https://wiki.samygo.tv/index.php?title=Top_Debug_Menu:_TDM
Console unlock and TDM codes
MStar (Series 5 & 6):
1198282
20089999
Just blindly start typing numbers:
20089999
====================================
[ TOP Debug Menu]
------------------------------------
1 : SubSystem Print On/Off
2 : Platform Print Setting
3 : TD Print Setting
4 : Performance Print Setting
5 : Sdal Print Setting
6 : Sdal Trace Setting
11 : TD Debug
12 : SubSystem DBG
13 : SubSystem Info Print
21 : Louvre Print Setting
30 : Auto Lock DBG
------------------------------------
70 : Jade Debug
80 : PVR Debug
81 : CSP debug
====================================
99 : Exit
====================================
