Dobrica Pavlinušić's random unstructured stuff
Raspdancer: Revision 7


Raspidancer

Facedancer on RaspberryPi http://wiki.yobi.be/wiki/Raspdancer

Newer software https://github.com/ktemkin/Facedancer

Schema: http://wiki.yobi.be/images/1/18/Raspdancer21_v10_sch.png

pi@picam ~ $ git clone https://github.com/ktemkin/Facedancer


pi@picam ~ $ git clone https://github.com/lthiery/SPI-Py
Cloning into 'SPI-Py'...
remote: Counting objects: 81, done.
remote: Total 81 (delta 0), reused 0 (delta 0), pack-reused 81
Unpacking objects: 100% (81/81), done.
Checking connectivity... done.
pi@picam ~ $ cd SPI-Py/

pi@picam ~/SPI-Py $ sudo apt-get install python3-dev

pi@picam ~/SPI-Py $ python3 setup.py build

pi@picam ~/SPI-Py $ sudo python3 setup.py install



pi@picam ~/Facedancer $ export BACKEND=raspdancer

pi@picam ~/Facedancer $ sudo -E ./facedancer-serial.py

pi@picam ~/Facedancer $ sudo -E ./facedancer-serial.py 
Using MAXUSB backend.
MAXUSB initialized
MAXUSB enabled
MAXUSB revision 0
<facedancer.backends.RaspdancerMaxUSBApp.RaspdancerMaxUSBApp object at 0xb6a67710>
MAXUSB connected device USB Serial device



USB Host Shield for Arduino Pro Mini

http://shop.tkjelectronics.dk/product_info.php?cPath=22&products_id=45

Schema: http://www.tkjelectronics.dk/uploads/usbhost/UHS_mini_10.pdf

problems

  • VBCOMP is not routed on this board
  • VBUS (usb VCC) is 3.3V not 5V

MAX3421 kernel module