Android

http://onlinedev.blogspot.com/2008/11/porting-android-phase-4-done.html

dpavlin@llin:/rest/cvs/qemu-neo1973/openmoko/android$ wget -r -np -m http://people.openmoko.org/sean_mcneil/

Open Issues

how to start matchbox-stroke ?
gsmd problem

Pending issues

gps driver
using keyboard without mouse -- Finger Keyboard

Resolved issues

correct time -- ipkg install ntpdate

Qemu

Alternative way to build qemu with Neo 1973 emulation:

# checkout source
svn co https://svn.openmoko.org/trunk/src/host/qemu-neo1973
cd qemu-neo1973

# run configure
./configure --target-list=arm-softmmu --enable-gadgetfs

# needed for gadgetfs to work
ln -s /usr/src/linux/include/linux

# build it
make

u-boot

GTA01Bv4 # nand bad

Device 0 bad blocks:
  00070000
  00ab0000
  00f00000
  03ff0000
  03ff4000
  03ff8000
  03ffc000

GTA01Bv4 # dynpart
mtdparts mtdparts=neo1973-nand:0x00040000(u-boot),0x00004000(u-boot_env),0x00204000(kernel),0x000a0000(splash),0x03d18000(rootfs)
GTA01Bv4 # dynenv set u-boot_env
device 0 offset 0x40000, size 0x4000
45 4e 56 30 - 00 00 04 00
GTA01Bv4 # 
device 0 offset 0x40000, size 0x4000
45 4e 56 30 - 00 00 04 00
GTA01Bv4 # saveenv
Saving Environment to NAND...
Saving ESaving EnvironmnvironmWriting to Nand... done

Info

GTA01Bv4 # bdinfo
arch_number = 0x0000049E
env_t       = 0x00000000
boot_params = 0x30000100
DRAM bank   = 0x00000000
-> start    = 0x30000000
-> size     = 0x08000000
ethaddr     = 00:00:00:00:00:00

ip_addr     = 0.0.0.0
baudrate    = 115200 bps


GTA01Bv4 # printenv
baudrate=115200
bootcmd=setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000 kernel; bootm 0x32000000
bootdelay=1
menu_1=Set console to USB: setenv stdin usbtty; setenv stdout usbtty; setenv stderr usbtty
menu_2=Set console to serial: setenv stdin serial; setenv stdout serial; setenv stderr serial
menu_3=Power off: neo1973 power-off
menu_4=Boot from SD: setenv bootargs root=/dev/mmcblk0p1 rootdelay=5 console=ttySAC0,115200 console=tty0 loglevel=8 ${mtdparts} ro; mmcinit; ext2load mmc 0 0x32000000 /boot/${sd_image_name}; bootm 0x32000000
mtdids=nand0=neo1973-nand
quiet=1
sd_image_name=uImage
splashimage=nand read.e 0x32000000 splash 0x5000; unzip 0x32000000 0x33d00000 0x96000
stderr=usbtty
stdin=usbtty
stdout=usbtty
usbtty=cdc_acm
bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=tty0 loglevel=8
mtdparts=mtdparts=neo1973-nand:0x00040000(u-boot),0x00004000(u-boot_env),0x00204000(kernel),0x000a0000(splash),0x03d18000(rootfs)
mtdparts=mtdparts=nmtddevnum=0
mtddevname=u-boot
pcf50606_int1=0x4a

Environment size: 1028/16380 bytes


GTA01Bv4 # mtd

device nand0 <neo1973-nand>, # parts = 5
 0: u-boot              0x00040000ts    0x00000000      0
 1: u-boot_env          0x00004000      0x00040000      0
 2: kernel              0x00204000      0x00044000      0
 3: splash              0x000a0000      0x00248000      0
 4: rootfs              0x03d18000      0x002e8000      0

active partition: nand0,0 - (u-boot) 0x00040000 @ 0x00000000

defaults:
mtdids  : nand0=neo1973-nand
mtdparts: <NULL>

openocd

x200:/virtual/openmoko# openocd 
Open On-Chip Debugger 0.4.0 (2010-02-23-17:04)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.berlios.de/doc/doxygen/bugs.html
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
Info : clock speed 6000 kHz
Info : JTAG tap: s3c2440.cpu tap/device found: 0x0032409d (mfg: 0x04e, part: 0x0324, ver: 0x0)
Info : Embedded ICE version 2
Info : s3c2440.cpu: hardware has 2 breakpoint/watchpoint units
Info : JTAG tap: s3c2440.cpu tap/device found: 0x0032409d (mfg: 0x04e, part: 0x0324, ver: 0x0)
Warn : NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
Warn : NOTE! Severe performance degradation without fast memory access enabled. Type 'help fast'.
target state: halted
target halted in ARM state due to debug-request, current mode: Supervisor
cpsr: 0x20000053 pc: 0x33f966d8
MMU: disabled, D-Cache: enabled, I-Cache: enabled
Info : accepting 'telnet' connection from 0
Runtime error, file "command.c", line 650:
    invalid command name "run"
Info : JTAG tap: s3c2440.cpu tap/device found: 0x0032409d (mfg: 0x04e, part: 0x0324, ver: 0x0)
Warn : NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.
Warn : NOTE! Severe performance degradation without fast memory access enabled. Type 'help fast'.

Android

Open Issues

Pending issues

Resolved issues

Qemu

See also

Other pages on this wiki about OpenMoko

My blog posts about OpenMoko

u-boot

Info

openocd