Raspbian installation

root@ntpi:/home/pi# systemctl start ssh

root@ntpi:/home/pi# systemctl enable ssh

pi@ntpi:~ $ grep pps /boot/config.txt 
dtoverlay=pps-gpio,gpiopin=18

pi@ntpi:~ $ sudo apt-get install pps-tools

# reboot, after it:

pi@ntpi:~ $ dmesg | grep pps
[   30.331047] pps_core: LinuxPPS API ver. 1 registered
[   30.331066] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   30.352868] pps pps0: new PPS source pps.-1
[   30.352966] pps pps0: Registered IRQ 178 as PPS source





root@ntpi:~# systemctl disable systemd-timesyncd
root@ntpi:~# systemctl stop systemd-timesyncd

pi@ntpi:~ $ hcitool scan
Scanning ...
        00:02:78:10:A2:32       SJ GPS

fix pps signal from this GPS and test again

root@ntpi:/home/pi# grep pps /boot/config.txt 
dtoverlay=pps-gpio,gpiopin=18,assert_falling_edge
root@ntpi:/home/pi# ppstest /dev/pps0 | head
trying PPS source "/dev/pps0"
found PPS source "/dev/pps0"
ok, found 1 source(s), now start fetching data...
source 0 - assert 1516805100.156350675, sequence: 70193 - clear  0.000000000, sequence: 0
source 0 - assert 1516805100.176368675, sequence: 70195 - clear  0.000000000, sequence: 0
source 0 - assert 1516805100.196339675, sequence: 70196 - clear  0.000000000, sequence: 0
source 0 - assert 1516805100.216363675, sequence: 70198 - clear  0.000000000, sequence: 0
source 0 - assert 1516805100.236378675, sequence: 70200 - clear  0.000000000, sequence: 0
source 0 - assert 1516805100.256385675, sequence: 70202 - clear  0.000000000, sequence: 0
source 0 - assert 1516805100.276392675, sequence: 70204 - clear  0.000000000, sequence: 0

Links

Raspbian installation