links

• http://www.esp8266.com/
• https://github.com/esp8266/esp8266-wiki/wiki
• http://www.electrodragon.com/w/Wi07c
• https://nurdspace.nl/ESP8266

• Documentation, tools, firmwares https://onedrive.live.com/?cid=C4DDF72E6EEA3826&id=C4DDF72E6EEA3826%21631

pinout

• all IO is 3.3V (3.6V max)
• CH_PD i chip-enable and has to be connected to VCC (3.3V)
• RST, GPIO0, GPIO2 should be pulled up to VCC for normal operation (GPIO0 at minumum!)
• GPIO0 pull to ground for firmware update
• make sure that 3.3V VCC power supply can support 300-400mA or there WILL be problems!

serial port

baud rate 115200

AT+GMR
00160901

OK

AT+RST

OK

 ets Jan  8 2013,rst cause:4, boot mode:(3,7)

wdt reset
load 0x40100000, len 24444, room 16 
tail 12
chksum 0xe0
ho 0 tail 12 room 4
load 0x3ffe8000, len 3168, room 12 
tail 4
chksum 0x93
load 0x3ffe8c60, len 4956, room 4 
tail 8
chksum 0xbd
csum 0xbd

ready