links

• http://www.esp8266.com/
• https://github.com/esp8266/esp8266-wiki/wiki
• http://www.electrodragon.com/w/Wi07c

pinout

• all IO is 3.3V (3.6V max)
• CH_PD i chip-enable and has to be connected to VCC (3.3V)
• RST, GPIO0, GPIO2 should be pulled up to VCC for normal operation (GPIO0 at minumum!)
• GPIO0 pull to ground for firmware update
• make sure that 3.3V VCC power supply can support 300-400mA or there WILL be problems!

serial port

baud rate 115200

AT+GMR
00160901

OK