Tags
There are no tags for this page.
Incoming Links
There are no pages that link to this page yet.
Attachments
Dobrica Pavlinušić's random unstructured stuff
ZPB30A1
dummy-load-sch.pdf
ZHIYU ZPB30A1 60W dummy load
input voltage: 12V 0.5A (11-14V)
constant current: 0.20-9.99 A
modes
hold run button at power on
Fun1 - dc load (continue working on voltage alarm)
Fun2 - battery test (stop load at specified voltage)8n
serial
115200 8n1
pins from bottom of the board upwards
G - GND
R - RX
T - TX
L - always low?
F - 50 Khz quare wave
Vc - input voltage
3 byte output, first two bytes are BCD voltage (3.35V) and last one is status (1=ok, 0=under voltage alarm)
pi@rpi2 ~ $ microcom -s 115200 -p /dev/ttyUSB4 | od -An -t x1 -w3
04 35 01
*
04 36 01
04 35 01
*
04 36 01
*
04 35 01
*
04 36 01
04 35 01
replacement firmware
|