V
4  
Tags
There are no tags for this page.
Attachments
Dobrica Pavlinušić's random unstructured stuff
Type-C Station 10 in 1

Markings on packaging:

poa5788067

skud49610

Features:

Support USB Type-C DisplayPort Alt Mode.
The standard USB-C interface supports forward and backward insertion.
Support PD charging function power up to 60W (5~20V/3A Only charging) Max.
Port use black rubber core + nickel plated shell.
Adopt standard USB-A interface.
Comply with USB3.0 standard 5Gbps transmission.
Support reading and writing data, U disk, card reader, keyboard, mouse, mobile hard disk, solid state hard disk, digital camera, etc.
USB3.0 single port output power 4.5W (5V/0.9A) supports charging devices such as mobile phones.
Supports Micro SD (T-Flash) with standard TF card slot.
Transfer data using USB3.0 standard theory: 5Gbps.
Adopt standard SD card slot
Adopt standard HDMI-mother interface
Support audio and video transmission, video support up to 4Kx2K/30Hz and backward compatible
HDMI1.4
Support analog signal video transmission, video support 1920x1080/60Hz, 1920x1080K/30Hz and backward compatible
RJ45 port adopts imported RTL8153 chip and supports 10M/100M/1000M networks transmission.
Adopt four microphone headphone jacks.
Compliance with the standard (CTIA).
Mic audio recording and playback support 48K and 44.1K sampling rate.

Specification:

Material:Aluminum alloy
Color: Silver/Gray
Applicable models:
For MacBook Pro 2017 (13"& 15")
For MacBook Pro 2016 (13"& 15")
For MacBook 2015/2016
For ChromeBook Pixel
Laptop Computers Complying with USB-C Interface
Output: Type-C
Input interface:
1*HDMI interface
1*VGA interface
3*USB 3.0 Interface
1*RJ45 interface
1*3.5mm Audio Interface
1*Memory Card Interface
1*TF Card Interface
1*Mini DP interface
Network Interface: Gigabit
Video resolution:
HDMI: 4K (3840*2160), 30Hz downward compatible
VGA: 1920*1080, 60Hz downward compatibility
Working Voltage: 5V~20V
Working temperature: 0~45°

Package included:

1 x Adapter Hub

x1 dmesg

Connected to usb-c on Thinkpad x1

[330796.938562] usb 4-1.2: Failed to set U1 timeout to 0x0,error code -19
[330796.945207] usb 4-1.2: Set SEL for device-initiated U1 failed.
[330796.953401] usb 4-1.2: Set SEL for device-initiated U2 failed.
[330796.953405] usb 4-1.2: usb_reset_and_verify_device Failed to disable LPM
[330800.072541] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
[330800.072572] usb 4-1: USB disconnect, device number 2
[330800.072578] usb 4-1.2: USB disconnect, device number 3
[330800.074002] usb 4-1.3: USB disconnect, device number 4
[330800.074185] cdc_ether 4-1.3:2.0 enx0050b6b7e85b: unregister 'cdc_ether' usb-0000:3b:00.0-1.3, CDC Ethernet Device
[330800.109311] usb 4-1.4: USB disconnect, device number 5
[330820.716417] usb 1-3: new full-speed USB device number 10 using xhci_hcd
[330820.879114] usb 1-3: New USB device found, idVendor=177a, idProduct=963d, bcdDevice= 1.00
[330820.879125] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[330820.879130] usb 1-3: Product: Billboard Device
[330820.879135] usb 1-3: Manufacturer: EXPSM USB
[330820.879138] usb 1-3: SerialNumber: 0001
[330820.889606] hid-generic 0003:177A:963D.0003: hiddev0,hidraw0: USB HID v1.10 Device [EXPSM USB Billboard Device] on usb-0000:00:14.0-3/input0
[330822.128370] usb 1-3: USB disconnect, device number 10
[330824.552424] xhci_hcd 0000:3b:00.0: Timeout while waiting for setup device command
[330824.760580] usb 4-1: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
[330824.800393] usb 1-3: new high-speed USB device number 11 using xhci_hcd
[330824.888497] usb 4-1: new SuperSpeed Gen 1 USB device number 6 using xhci_hcd
[330824.972239] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
[330824.972246] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[330824.972249] usb 1-3: Product: USB2.1 Hub
[330824.972251] usb 1-3: Manufacturer: GenesysLogic
[330824.975342] hub 1-3:1.0: USB hub found
[330824.979079] hub 1-3:1.0: 4 ports detected
[330825.233338] usb 4-1: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd
[330825.255826] usb 4-1: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
[330825.255837] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[330825.255842] usb 4-1: Product: USB3.1 Hub
[330825.255846] usb 4-1: Manufacturer: GenesysLogic
[330825.257766] hub 4-1:1.0: USB hub found
[330825.258065] hub 4-1:1.0: 4 ports detected
[330825.312494] usb 1-3.3: new high-speed USB device number 12 using xhci_hcd
[330825.437770] usb 1-3.3: New USB device found, idVendor=05e3, idProduct=0618, bcdDevice=87.53
[330825.437780] usb 1-3.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[330825.437785] usb 1-3.3: Product: USB2.0 Hub
[330825.439067] hub 1-3.3:1.0: USB hub found
[330825.439379] hub 1-3.3:1.0: 4 ports detected
[330825.544465] usb 4-1.4: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[330825.565383] usb 4-1.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[330825.565394] usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[330825.565399] usb 4-1.4: Product: USB 10/100/1000 LAN
[330825.565403] usb 4-1.4: Manufacturer: Realtek
[330825.565406] usb 4-1.4: SerialNumber: 000001
[330825.608359] usbcore: registered new interface driver r8152
[330825.688848] usb 4-1.4: reset SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[330825.728420] usb 1-3.3.1: new high-speed USB device number 13 using xhci_hcd
[330825.740964] r8152 4-1.4:1.0 eth0: v1.09.9
[330825.791038] r8152 4-1.4:1.0 enx00e04c6800e9: renamed from eth0
[330825.841409] usb 1-3.3.1: New USB device found, idVendor=05e3, idProduct=0752, bcdDevice= 2.33
[330825.841412] usb 1-3.3.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[330825.841414] usb 1-3.3.1: Product: USB Storage
[330825.841415] usb 1-3.3.1: Manufacturer: Generic
[330825.843667] usb-storage 1-3.3.1:1.0: USB Mass Storage device detected
[330825.843985] scsi host1: usb-storage 1-3.3.1:1.0
[330826.857820] scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0233 PQ: 0 ANSI: 0
[330826.858611] sd 1:0:0:0: Attached scsi generic sg1 type 0
[330826.860029] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[330839.531138] usb 1-3: USB disconnect, device number 11
[330839.531149] usb 1-3.3: USB disconnect, device number 12
[330839.531154] usb 1-3.3.1: USB disconnect, device number 13
[330840.284381] usb 4-1: USB disconnect, device number 7
[330840.284392] usb 4-1.4: USB disconnect, device number 8

x230 dmesg

Connected using usb-c to usb 3 adapter (no video adapter if not connected using usb-c?)

[Sat Aug 29 13:14:26 2020] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[Sat Aug 29 13:14:32 2020] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[Sat Aug 29 13:14:32 2020] usb 3-2.4: device not accepting address 6, error -62
[Sat Aug 29 13:14:32 2020] usb 2-2.4: new high-speed USB device number 10 using xhci_hcd
[Sat Aug 29 13:14:32 2020] usb 2-2.4: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice= 6.54
[Sat Aug 29 13:14:32 2020] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Sat Aug 29 13:14:32 2020] usb 2-2.4: Product: USB2.1 Hub
[Sat Aug 29 13:14:32 2020] usb 2-2.4: Manufacturer: GenesysLogic
[Sat Aug 29 13:14:32 2020] hub 2-2.4:1.0: USB hub found
[Sat Aug 29 13:14:32 2020] hub 2-2.4:1.0: 4 ports detected
[Sat Aug 29 13:14:32 2020] usb 3-2.4: new SuperSpeed Gen 1 USB device number 7 using xhci_hcd
[Sat Aug 29 13:14:33 2020] usb 3-2.4: New USB device found, idVendor=05e3, idProduct=0626, bcdDevice= 6.54
[Sat Aug 29 13:14:33 2020] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[Sat Aug 29 13:14:33 2020] usb 3-2.4: Product: USB3.1 Hub
[Sat Aug 29 13:14:33 2020] usb 3-2.4: Manufacturer: GenesysLogic
[Sat Aug 29 13:14:33 2020] hub 3-2.4:1.0: USB hub found
[Sat Aug 29 13:14:33 2020] hub 3-2.4:1.0: 4 ports detected
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3: new high-speed USB device number 11 using xhci_hcd
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3: New USB device found, idVendor=05e3, idProduct=0618, bcdDevice=87.53
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3: Product: USB2.0 Hub
[Sat Aug 29 13:14:33 2020] hub 2-2.4.3:1.0: USB hub found
[Sat Aug 29 13:14:33 2020] hub 2-2.4.3:1.0: 4 ports detected
[Sat Aug 29 13:14:33 2020] usb 3-2.4.4: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[Sat Aug 29 13:14:33 2020] usb 3-2.4.4: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[Sat Aug 29 13:14:33 2020] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[Sat Aug 29 13:14:33 2020] usb 3-2.4.4: Product: USB 10/100/1000 LAN
[Sat Aug 29 13:14:33 2020] usb 3-2.4.4: Manufacturer: Realtek
[Sat Aug 29 13:14:33 2020] usb 3-2.4.4: SerialNumber: 000001
[Sat Aug 29 13:14:33 2020] usb 3-2.4.4: reset SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[Sat Aug 29 13:14:33 2020] r8152 3-2.4.4:1.0: firmware: failed to load rtl_nic/rtl8153a-4.fw (-2)
[Sat Aug 29 13:14:33 2020] r8152 3-2.4.4:1.0: Direct firmware load for rtl_nic/rtl8153a-4.fw failed with error -2
[Sat Aug 29 13:14:33 2020] r8152 3-2.4.4:1.0: unable to load firmware patch rtl_nic/rtl8153a-4.fw (-2)
[Sat Aug 29 13:14:33 2020] r8152 3-2.4.4:1.0 eth0: v1.11.11
[Sat Aug 29 13:14:33 2020] r8152 3-2.4.4:1.0 enx00e04c6800e9: renamed from eth0
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3.1: new high-speed USB device number 12 using xhci_hcd
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3.1: New USB device found, idVendor=05e3, idProduct=0752, bcdDevice= 2.33
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3.1: New USB device strings: Mfr=3, Product=4, SerialNumber=0
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3.1: Product: USB Storage
[Sat Aug 29 13:14:33 2020] usb 2-2.4.3.1: Manufacturer: Generic
[Sat Aug 29 13:14:33 2020] usb-storage 2-2.4.3.1:1.0: USB Mass Storage device detected
[Sat Aug 29 13:14:33 2020] scsi host6: usb-storage 2-2.4.3.1:1.0
[Sat Aug 29 13:14:34 2020] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0233 PQ: 0 ANSI: 0
[Sat Aug 29 13:14:34 2020] sd 6:0:0:0: Attached scsi generic sg2 type 0
[Sat Aug 29 13:14:34 2020] sd 6:0:0:0: [sdc] Attached SCSI removable disk

firmware for network card

root@x230:/home/dpavlin# apt install firmware-realtek

dpavlin@x230:/lib/firmware$ ls -al rtl_nic/rtl8153a-4.fw
ls: cannot access 'rtl_nic/rtl8153a-4.fw': No such file or directory

sigh, if package is too old here is work-around: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=962972


 

Upload Files

Click "Browse" to find the file you want to upload. When you click "Upload file" your file will be uploaded and added to the list of attachments for this page.

Maximum file size: 50MB

 
 
 
File Name Author Date Uploaded Size

Save Page As

Enter a meaningful and distinctive title for your page.

Page Title:

Tip: You'll be able to find this page later by using the title you choose.

Page Already Exists

There is already a page named XXX. Would you like to:

Save with a different name:

Save the page with the name "XXX"

Append your text to the bottom of the existing page named: "XXX"

Upload Files

Click "Browse" to find the file you want to upload. When you click "Add file" this file will be added to the list of attachments for this page, and uploaded when you save the page.

 
 
 
Add Tags

Enter a tag and click "Add tag". The tag will be saved when you save the page.

Tag: 

Suggestions: