Dobrica Pavlinušić's random unstructured stuff
PrintrBot: Revision 25
{toc: }
^ parts to print http://www.thingiverse.com/dpavlin/favorites ^^ Printrbot + Upgrades X-bridge, Extruder Mount, Y-Clips... * http://www.thingiverse.com/thing:31012 * http://polakiumengineering.org/?p=1905 (including description and shop!) ^^ glass on printerbed * screws and nuts: http://www.printrbottalk.com/forum/viewtopic.php?f=21&t=1614&p=12374&hilit=glass#p12350 * printable glass clips: http://www.thingiverse.com/search?q=printrbot+glass&sa=Search ** 3mm glass - http://www.thingiverse.com/thing:24807 ** 4mm/3.75mm glass - http://www.thingiverse.com/thing:25659 ** http://www.thingiverse.com/thing:22429 ** Easily Adjustable Printrbot Glass Clips http://www.thingiverse.com/thing:27269 ** Printrbot LC+ Heated Bed Clips Side & Front http://www.thingiverse.com/thing:26947 ^^ fan mount for printing ABS http://www.thingiverse.com/thing:24545 ^^ Z-Axis Stabiliser Ends * needs rod - http://www.thingiverse.com/thing:23663 * Top Joiner - Plastic Cross Beam http://www.thingiverse.com/thing:33322 * threaded rod - http://www.thingiverse.com/thing:23038 ^^ bad leveling * Spring Loaded Bed Leveling System http://www.thingiverse.com/thing:27720 ** below printbed, requires modification to y belt -- model for Longer Y Axis Belt Clips http://www.thingiverse.com/thing:29496 * Printrbot LC Plus Adjustable bed leveling nut lock http://www.thingiverse.com/thing:27395 ^^ extruder * Extruder Measurement Tool http://www.thingiverse.com/thing:29566 ^^ filament guide * http://www.thingiverse.com/thing:24526 - related "Bearing" for Printrbot filament guide thingy http://www.thingiverse.com/thing:27634 * http://www.thingiverse.com/thing:27574 ^^ printrbot replacement parts * PrintrPlate - Printrbot Full Build Tray http://www.thingiverse.com/thing:30398 * ExtrudrPlate http://www.thingiverse.com/thing:30787 * Original Printrbot (abdrumm) http://www.thingiverse.com/thing:16990 ^ Forum topics ^^ poor fit of laser cut parts http://www.printrbottalk.com/forum/viewtopic.php?f=6&t=1052 (solved with a little bit of force) ^^ bad bearings http://www.printrbottalk.com/forum/viewtopic.php?f=6&t=1383 WIP: ordering replacement ^^ hot extruder motor http://www.printrbottalk.com/forum/viewtopic.php?f=15&t=1688 WIP: print spur gears http://www.thingiverse.com/thing:26243 ^^ z stop badly aligned http://www.printrbottalk.com/forum/viewtopic.php?f=70&t=1711#p12886 ^^ bed leveling with ruler http://www.printrbottalk.com/forum/viewtopic.php?f=29&t=662 ^^ vertical rods issue http://www.printrbottalk.com/forum/viewtopic.php?f=6&t=1615 |