Dobrica Pavlinušić's random unstructured stuff
Papilio: Revision 11


loader

https://github.com/GadgetFactory/Papilio-Loader/pull/6

dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone https://github.com/GadgetFactory/Papilio-Loader.git
dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd Papilio-Loader/papilio-prog
dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ git checkout -b revert-libftdi2 261d0dd02f5489c63e8227c6f916af5efacfbe7a
dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./autogen.sh 
dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./configure && make

# check compiled binary
dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./papilio-prog -v -j
Using built-in device list
JTAG chainpos: 0 Device IDCODE = 0x24001093     Desc: XC6SLX9
USB transactions: Write 3 read 2 retries 1


ZAP IDE

compilation

dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone https://github.com/GadgetFactory/ZAP--ZPUino-Arduino-Papilio--IDE.git

dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd ZAP--ZPUino-Arduino-Papilio--IDE/build/
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build$ ant

dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux$ ln -s zpu_tools_linux32.tar.bz2 zpu_tools_linux64.tar.bz2 

fix papilio-prog to use Linux binary

dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ vi ./hardware/zpuino/zpu/platform.txt
# remove .exe from this line
tools.papilioprog.erase.pattern="{path}/bin/papilio-prog" -c

# copy compiled papilio-prog to correct location
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ cp ../../../../Papilio-Loader/papilio-prog/papilio-prog hardware/tools/papilio/papilio_loader/bin/


running IDE

Run arduino GUI:

dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ ./arduino

Compilation works, but programming doesn't with error:

Board: Unknown board @ 96000000 Hz (0xa4041700)

so, let's rebuild zpuprogrammer

http://forum.gadgetfactory.net/index.php?/topic/1588-how-to-program-the-arduino-sketch-for-zpuino-to-the-spi-flash/page-2#entry11242

dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ git remote -v
origin  https://github.com/alvieboy/ZPUino-HDL/ (fetch)
origin  https://github.com/alvieboy/ZPUino-HDL/ (push)

dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ autoreconf --install
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ ./configure
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ make
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ cp zpuinoprogrammer /blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/dist/tools/
# this one is for already built version
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ cp zpuinoprogrammer /blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work/hardware/tools/zpu/bin/zpuinoprogrammer

program boot file (IDE doesn't have permission to do so)

dpavlin@blue:/blue-zfs/FPGA/Papilio$ ./papilio-prog -v -f ./zap-2.0.5/hardware/zpuino/zpu/bootloaders/lx9/zpuino-1.0-PapilioPro-S6LX9-RetroCade-1.0.bit
Using built-in device list
JTAG chainpos: 0 Device IDCODE = 0x24001093     Desc: XC6SLX9
Created from NCD file: papilio_pro_routed.ncd;UserID=0xFFFFFFFF
Target device: 6slx9tqg144
Created: 2012/11/20 00:16:43
Bitstream length: 2727072 bits

Uploading "./zap-2.0.5/hardware/zpuino/zpu/bootloaders/lx9/zpuino-1.0-PapilioPro-S6LX9-RetroCade-1.0.bit". DNA is 0x190efd25eb57c9fe
Done.
Programming time 549.2 ms
USB transactions: Write 176 read 8 retries 5

run IDE

dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ ./arduino
Experimental:  JNI_OnLoad called.
Stable Library
=========================================
Native lib Version = RXTX-2.1-7
Java lib Version   = RXTX-2.1-7

verification will fail, so just upload sketch:

dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-SOC/zpu/hdl/zpuino/programmer$ ./zpuinoprogrammer -s 1000000 -R -d /dev/ttyUSB1 -b /tmp/build383944339812357036.tmp/Autoscroll.cpp.bin -U
Board: GadgetFactory Papilio Pro LX9 @ 96000000 Hz (0xa4041700)
Upload completed successfully in 0.05 seconds.

zpugcc

dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone git://repo.or.cz/zpugcc.git
Cloning into 'zpugcc'...
remote: Counting objects: 35519, done.
remote: Compressing objects: 100% (26110/26110), done.
remote: Total 35519 (delta 8445), reused 35519 (delta 8445)
Receiving objects: 100% (35519/35519), 70.18 MiB | 426.00 KiB/s, done.
Resolving deltas: 100% (8445/8445), done.
Checking connectivity... done.
Checking out files: 100% (35311/35311), done.
dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd zpugcc/toolchain
dpavlin@blue:/blue-zfs/FPGA/Papilio/zpugcc/toolchain$ git diff build.sh
diff --git a/toolchain/build.sh b/toolchain/build.sh
index 783beaa..034929c 100644
--- a/toolchain/build.sh
+++ b/toolchain/build.sh
@@ -3,6 +3,9 @@ set -e
 rm -rf build
 mkdir build
 cd build
+mkdir bin
+ln -s /bin/true bin/makeinfo
+export PATH=`pwd`/bin:$PATH
 ../binutils/configure --target=zpu-elf --prefix=`pwd`/../install
 make
 make install
dpavlin@blue:/blue-zfs/FPGA/Papilio/zpugcc/toolchain$ sh -x build.sh