|
Dobrica Pavlinušić's random unstructured stuff
Papilio: Revision 7
loaderhttps://github.com/GadgetFactory/Papilio-Loader/pull/6 dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone https://github.com/GadgetFactory/Papilio-Loader.git dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd Papilio-Loader/papilio-prog dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ git checkout -b revert-libftdi2 261d0dd02f5489c63e8227c6f916af5efacfbe7a dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./autogen.sh dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./configure && make ZAP IDEdpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone https://github.com/GadgetFactory/ZAP--ZPUino-Arduino-Papilio--IDE.git dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd ZAP--ZPUino-Arduino-Papilio--IDE/build/ dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build$ ant dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux$ ln -s zpu_tools_linux32.tar.bz2 zpu_tools_linux64.tar.bz2 Compilation works, but programming doesn't with error: Board: Unknown board @ 96000000 Hz (0xa4041700) so, let's rebuild zpuprogrammer dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ autoreconf --install dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ ./configure dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ make dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ cp zpuinoprogrammer /blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/dist/tools/ program boot file (IDE doesn't have permission to do so) dpavlin@blue:/blue-zfs/FPGA/Papilio$ ./papilio-prog -v -f ./zap-2.0.5/hardware/zpuino/zpu/bootloaders/lx9/zpuino-1.0-PapilioPro-S6LX9-RetroCade-1.0.bit Using built-in device list JTAG chainpos: 0 Device IDCODE = 0x24001093 Desc: XC6SLX9 Created from NCD file: papilio_pro_routed.ncd;UserID=0xFFFFFFFF Target device: 6slx9tqg144 Created: 2012/11/20 00:16:43 Bitstream length: 2727072 bits Uploading "./zap-2.0.5/hardware/zpuino/zpu/bootloaders/lx9/zpuino-1.0-PapilioPro-S6LX9-RetroCade-1.0.bit". DNA is 0x190efd25eb57c9fe Done. Programming time 549.2 ms USB transactions: Write 176 read 8 retries 5 run IDE dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ ./arduino Experimental: JNI_OnLoad called. Stable Library ========================================= Native lib Version = RXTX-2.1-7 Java lib Version = RXTX-2.1-7 verification will fail, so just upload sketch: dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-SOC/zpu/hdl/zpuino/programmer$ ./zpuinoprogrammer -s 1000000 -R -d /dev/ttyUSB1 -b /tmp/build383944339812357036.tmp/Autoscroll.cpp.bin -U Board: GadgetFactory Papilio Pro LX9 @ 96000000 Hz (0xa4041700) Upload completed successfully in 0.05 seconds. |