|
Dobrica Pavlinušić's random unstructured stuff
Lamobo R1: Revision 23
{image: GPIO 2.png}
Lamobo/BananaPi R1 http://linux-sunxi.org/Lamobo_R1 {toc: } ^ switch connects all ports on boot https://github.com/armbian/build/issues/511#issuecomment-258647387 ^^ DSA config on armbian for r1 * https://github.com/armbian/build/issues/511 ^ uart Connect your UART adapter here: UART0-RX: J13-P01 UART0-TX: J13-P02 GND: J12-P08 .pre GND TX RX J12 o o o o o o {SD slot} o o o o .pre ^ switch https://www.mail-archive.com/netdev@vger.kernel.org/msg150526.html ^^ port mirroring https://www.mail-archive.com/netdev@vger.kernel.org/msg150526.html .pre # ingress tc qdisc add dev eth1 handle ffff: ingress tc filter add dev eth1 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth2 # egress tc qdisc add dev eth1 handle 1: root prio tc filter add dev eth1 parent 1: \ matchall skip_sw \ action mirred egress mirror \ dev eth2 .pre ^ usb otg http://git.rot13.org/?p=usb-otg;a=summary ^ usbproxy make sure that there are no other usb modules loaded (libcomposite or g_*) ^^ mitm usb otg machine .pre dpavlin@r1:~/USBProxy$ git remote -v origin https://github.com/dominicgs/USBProxy (fetch) origin https://github.com/dominicgs/USBProxy (push) dpavlin@r1:~/USBProxy/src/build$ sudo usb-mitm -l -v 058f -p 6387 -P PacketFilter_MassStorage Loading plugins from /usr/local/lib/USBProxy/ vendorId=058f productId=6387 cleaning up /tmp removing 1 Made directory /tmp/gadget-SOOBVj for gadget UnblockPassword= Printing Config data Strings: 4 DeviceProxy: DeviceProxy_LibUSB HostProxy: HostProxy_GadgetFS productId: 6387 vendorId: 058f Vectors: 1 Plugins: PacketFilter_StreamLog PacketFilter_MassStorage Pointer: 1 PacketFilter_StreamLog::file: 0xb6d779f0 Device: 12 01 00 02 00 00 00 40 8f 05 87 63 00 01 01 02 03 01 Manufacturer: JetFlash Product: Mass Storage Device Serial: GUYOBHDU *Config(1): 09 02 20 00 01 01 00 80 32 Interface(0): *Alt(0): 09 04 00 00 02 08 06 50 00 EP(01): 07 05 01 02 00 02 00 EP(82): 07 05 82 02 00 02 00 HS Qualifier: 0a 06 00 02 00 00 00 40 01 00 Config(1): 09 07 20 00 01 01 00 80 32 Interface(0): *Alt(0): 09 04 00 00 02 08 06 50 00 EP(01): 07 05 01 02 40 00 00 EP(82): 07 05 82 02 40 00 00 searching in [/tmp/gadget-SOOBVj] Starting injector thread (14796) for [Injector]. Injector In FD[1/1]: 3 Starting setup writer thread (14799) for EP00. Starting setup reader thread (14797) for EP00. [80 06 00 03 00 00 ff 00] [80 06 00 03 00 00 04 00]: 04 03 09 04 [80 06 02 03 09 04 ff 00] [80 06 02 03 09 04 28 00]: 28 03 4d 00 61 00 73 00 73 00 20 00 53 00 74 00 6f 00 72 00 61 00 67 00 65 00 20 00 44 00 65 00 76 00 69 00 63 00 65 00 [80 06 01 03 09 04 ff 00] [80 06 01 03 09 04 12 00]: 12 03 4a 00 65 00 74 00 46 00 6c 00 61 00 73 00 68 00 [80 06 03 03 09 04 ff 00] [80 06 03 03 09 04 12 00]: 12 03 47 00 55 00 59 00 4f 00 42 00 48 00 44 00 55 00 [00 09 01 00 00 00 00 00] Opened EP01 Opened EP82 Starting writer thread (14802) for EP01. Starting reader thread (14803) for EP82. Starting writer thread (14804) for EP82. Starting reader thread (14801) for EP01. [a1 fe 00 00 00 00 01 00] [a1 fe 00 00 00 00 00 00] 01[31]: 55 53 42 43 01 00 00 00 24 00 00 00 80 00 06 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 CBW: (12), tag: 01 00 00 00 [80 06 03 03 09 04 ff 00] [80 06 03 03 09 04 12 00]: 12 03 47 00 55 00 59 00 4f 00 42 00 48 00 44 00 55 00 [00 09 01 00 00 00 00 00] .pre ^^ original target device .pre dpavlin@nuc:~$ journalctl -t kernel -f Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: new high-speed USB device number 45 using xhci_hcd Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: New USB device found, idVendor=058f, idProduct=6387 Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: Product: Mass Storage Device Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: Manufacturer: JetFlash Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: SerialNumber: GUYOBHDU Sep 01 11:10:04 nuc kernel: usb-storage 2-4.4.2:1.0: USB Mass Storage device detected Sep 01 11:10:04 nuc kernel: scsi host5: usb-storage 2-4.4.2:1.0 # BUT! dpavlin@nuc:~$ sudo fdisk -l /dev/sdb fdisk: cannot open /dev/sdb: No medium found .pre ^ WiringPi .pre dpavlin@r1:~/BPI-WiringPi2$ git remote -v lanefu https://github.com/lanefu/WiringOtherPi (fetch) lanefu https://github.com/lanefu/WiringOtherPi (push) origin https://github.com/BPI-SINOVOIP/BPI-WiringPi2 (fetch) origin https://github.com/BPI-SINOVOIP/BPI-WiringPi2 (push) dpavlin@r1:~/BPI-WiringPi2$ gpio readall +-----+-----+----------+------+---+-Orange Pi+---+---+------+---------+-----+--+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 12 | 8 | SDA.0 | IN | 0 | 3 || 4 | | | 5V | | | | 11 | 9 | SCL.0 | IN | 0 | 5 || 6 | | | 0v | | | | 6 | 7 | GPIO.7 | IN | 0 | 7 || 8 | 0 | IN | TxD3 | 15 | 13 | | | | 0v | | | 9 || 10 | 0 | IN | RxD3 | 16 | 14 | | 1 | 0 | RxD2 | IN | 0 | 11 || 12 | 0 | IN | GPIO.1 | 1 | 110 | | 0 | 2 | TxD2 | IN | 0 | 13 || 14 | | | 0v | | | | 3 | 3 | CTS2 | IN | 0 | 15 || 16 | 0 | IN | GPIO.4 | 4 | 68 | | | | 3.3v | | | 17 || 18 | 0 | IN | GPIO.5 | 5 | 71 | | 64 | 12 | MOSI | IN | 0 | 19 || 20 | | | 0v | | | | 65 | 13 | MISO | IN | 0 | 21 || 22 | 0 | IN | RTS2 | 6 | 2 | | 66 | 14 | SCLK | IN | 0 | 23 || 24 | 0 | IN | CE0 | 10 | 67 | | | | 0v | | | 25 || 26 | 0 | IN | GPIO.11 | 11 | 21 | | 19 | 30 | SDA.1 | IN | 0 | 27 || 28 | 0 | IN | SCL.1 | 31 | 18 | | 7 | 21 | GPIO.21 | IN | 0 | 29 || 30 | | | 0v | | | | 8 | 22 | GPIO.22 | IN | 0 | 31 || 32 | 0 | IN | RTS1 | 26 | 200 | | 9 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | | | 10 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 0 | IN | CTS1 | 27 | 201 | | 20 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | IN | TxD1 | 28 | 198 | | | | 0v | | | 39 || 40 | 0 | IN | RxD1 | 29 | 199 | +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+----------+------+---+-Orange Pi+---+------+----------+-----+-----+ .pre ^ TMP75 .pre root@r1:/etc/telegraf# i2cdetect -y 1 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 40: -- -- -- -- -- -- -- -- -- 49 -- -- -- -- -- -- 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 70: -- -- -- -- -- -- -- -- .pre ^^ userland * https://github.com/ManuelSchneid3r/RaspberryPi/blob/master/sensors/src/tmp.c .pre dpavlin@r1:~$ cc tmp.c -o tmp -lm dpavlin@r1:~$ sudo ./tmp /dev/i2c-1 0x49 21.5 .pre ^^ kernel hwmomn lm75 driver .pre root@r1:~# echo lm75 0x49 > /sys/bus/i2c/devices/i2c-1/new_device root@r1:~# dmesg | tail -2 [68352.599623] lm75 1-0049: hwmon1: sensor 'lm75' [68352.599719] i2c i2c-1: new_device: Instantiated device lm75 at 0x49 root@r1:/sys/bus/i2c/devices/i2c-1# sensors sun4i_ts-isa-0000 Adapter: ISA adapter SoC temperature: +44.4°C lm75-i2c-1-49 Adapter: mv64xxx_i2c adapter temp1: +22.0°C (high = +80.0°C, hyst = +75.0°C) .pre ^ network performance ^^ kernel 3.4 .pre root@r1:~# uname -a Linux r1 3.4.113-sun7i #23 SMP PREEMPT Wed Jun 14 23:57:45 CEST 2017 armv7l GNU/Linux root@r1:~# iperf3 --reverse --client nuc Connecting to host nuc, port 5201 Reverse mode, remote host nuc is sending [ 4] local 192.168.3.238 port 58203 connected to 192.168.3.40 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 107 MBytes 897 Mbits/sec [ 4] 1.00-2.00 sec 110 MBytes 923 Mbits/sec [ 4] 2.00-3.00 sec 111 MBytes 935 Mbits/sec [ 4] 3.00-4.00 sec 107 MBytes 894 Mbits/sec [ 4] 4.00-5.00 sec 111 MBytes 927 Mbits/sec [ 4] 5.00-6.00 sec 110 MBytes 922 Mbits/sec [ 4] 6.00-7.00 sec 111 MBytes 928 Mbits/sec [ 4] 7.00-8.00 sec 111 MBytes 935 Mbits/sec [ 4] 8.00-9.00 sec 111 MBytes 928 Mbits/sec [ 4] 9.00-10.00 sec 111 MBytes 931 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 1.08 GBytes 924 Mbits/sec 147 sender [ 4] 0.00-10.00 sec 1.07 GBytes 922 Mbits/sec receiver iperf Done. root@r1:~# iperf3 --client nuc Connecting to host nuc, port 5201 [ 4] local 192.168.3.238 port 58205 connected to 192.168.3.40 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 51.3 MBytes 428 Mbits/sec 0 239 KBytes [ 4] 1.00-2.01 sec 52.5 MBytes 436 Mbits/sec 0 240 KBytes [ 4] 2.01-3.02 sec 52.5 MBytes 436 Mbits/sec 0 245 KBytes [ 4] 3.02-4.01 sec 50.0 MBytes 424 Mbits/sec 0 246 KBytes [ 4] 4.01-5.02 sec 51.2 MBytes 429 Mbits/sec 0 247 KBytes [ 4] 5.02-6.02 sec 52.5 MBytes 439 Mbits/sec 0 250 KBytes [ 4] 6.02-7.03 sec 51.2 MBytes 427 Mbits/sec 0 253 KBytes [ 4] 7.03-8.00 sec 48.8 MBytes 418 Mbits/sec 0 256 KBytes [ 4] 8.00-9.02 sec 52.5 MBytes 432 Mbits/sec 0 256 KBytes [ 4] 9.02-10.01 sec 51.2 MBytes 435 Mbits/sec 0 256 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.01 sec 514 MBytes 431 Mbits/sec 0 sender [ 4] 0.00-10.01 sec 514 MBytes 431 Mbits/sec receiver .pre ^^ kernel 4.13 .pre root@r1:~# uname -a Linux r1 4.13.10-sunxi #57 SMP Mon Oct 30 00:08:27 CET 2017 armv7l GNU/Linux root@r1:~# iperf3 --client nuc Connecting to host nuc, port 5201 [ 4] local 192.168.3.238 port 59520 connected to 192.168.3.40 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 67.9 MBytes 567 Mbits/sec 0 765 KBytes [ 4] 1.00-2.01 sec 82.1 MBytes 687 Mbits/sec 0 840 KBytes [ 4] 2.01-3.01 sec 65.7 MBytes 547 Mbits/sec 0 1.13 MBytes [ 4] 3.01-4.02 sec 80.0 MBytes 669 Mbits/sec 0 1.13 MBytes [ 4] 4.02-5.00 sec 76.2 MBytes 648 Mbits/sec 0 1.24 MBytes [ 4] 5.00-6.00 sec 81.2 MBytes 681 Mbits/sec 0 1.24 MBytes [ 4] 6.00-7.06 sec 82.5 MBytes 656 Mbits/sec 0 1.33 MBytes [ 4] 7.06-8.00 sec 80.0 MBytes 712 Mbits/sec 0 1.33 MBytes [ 4] 8.00-9.00 sec 78.8 MBytes 659 Mbits/sec 0 1.61 MBytes [ 4] 9.00-10.00 sec 83.8 MBytes 702 Mbits/sec 0 2.08 MBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 778 MBytes 653 Mbits/sec 0 sender [ 4] 0.00-10.00 sec 775 MBytes 650 Mbits/sec receiver iperf Done. root@r1:~# iperf3 --reverse --client nuc Connecting to host nuc, port 5201 Reverse mode, remote host nuc is sending [ 4] local 192.168.3.238 port 59524 connected to 192.168.3.40 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 98.0 MBytes 822 Mbits/sec [ 4] 1.00-2.00 sec 112 MBytes 933 Mbits/sec [ 4] 2.00-3.00 sec 107 MBytes 904 Mbits/sec [ 4] 3.00-4.00 sec 107 MBytes 898 Mbits/sec [ 4] 4.00-5.00 sec 108 MBytes 904 Mbits/sec [ 4] 5.00-6.00 sec 108 MBytes 903 Mbits/sec [ 4] 6.00-7.00 sec 108 MBytes 904 Mbits/sec [ 4] 7.00-8.00 sec 108 MBytes 904 Mbits/sec [ 4] 8.00-9.00 sec 108 MBytes 904 Mbits/sec [ 4] 9.00-10.00 sec 107 MBytes 899 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 1.05 GBytes 900 Mbits/sec 69 sender [ 4] 0.00-10.00 sec 1.05 GBytes 898 Mbits/sec receiver .pre |