|
Dobrica Pavlinušić's random unstructured stuff
Intel SSD: Revision 5
Intel SSD died
.pre smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-4-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: INTEL SSDSA2BW160G3H Serial Number: BAD_CTX 00000136 LU WWN Device Id: 5 001517 a6be8caac Firmware Version: 4PC10365 User Capacity: 8,388,608 bytes [8.38 MB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Apr 27 17:23:39 2019 CEST SMART support is: Unavailable - device lacks SMART capability. === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enable failed: scsi error badly formed scsi parameters A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options. dpavlin@x200:~$ sudo hdparm -i /dev/sdc /dev/sdc: Model=INTEL SSDSA2BW160G3H, FwRev=4PC10365, SerialNo=BAD_CTX 00000136 Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=1 CurCHS=16/16/63, CurSects=16128, LBA=yes, LBAsects=16384 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=no WriteCache=enabled Drive conforms to: unknown: ATA/ATAPI-2,3,4,5,6,7 * signifies the current active mode dpavlin@x200:~/intel-ssd$ sudo smartctl -a /dev/sdc > smartctl.1 dpavlin@x200:~/intel-ssd$ sudo hdparm -i /dev/sdc > hdparm-i.1 dpavlin@x200:~/intel-ssd$ sudo hdparm -I /dev/sdc > hdparm-I.1 .pre Internet visdom is that it's corrupted translation table and that secure erase or firmware update might help. ^ secure erase https://ata.wiki.kernel.org/index.php/ATA_Secure_Erase .pre dpavlin@x200:~/intel-ssd$ sudo hdparm -I /dev/sdc | grep frozen not frozen # ok root@x200:/home/dpavlin/intel-ssd# hdparm --user-master u --security-set-pass Eins /dev/sdc security_password: "Eins" /dev/sdc: Issuing SECURITY_SET_PASS command, password="Eins", user=user, mode=high root@x200:/home/dpavlin/intel-ssd# hdparm -I /dev/sdc | grep -C 3 enabled Security: Master password revision code = 65534 supported enabled not locked not frozen not expired: security count root@x200:/home/dpavlin/intel-ssd# time hdparm --user-master u --security-erase Eins /dev/sdc security_password: "Eins" /dev/sdc: Issuing SECURITY_ERASE command, password="Eins", user=user real 0m19.285s user 0m0.001s sys 0m0.004s .pre This I assume reseted traslation table on ssd. First invocation of smartctl complained that I have to use -s on to turn smart on, so I did. And it seems to work. All smart counters are reset (beacuse smart was off after secure erase). .pre dpavlin@tab:~$ sudo smartctl -a /dev/sda | head -20 smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-8-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: INTEL SSDSA2BW160G3H Serial Number: BTPR144501A5160DGN LU WWN Device Id: 5 001517 a6be8caac Firmware Version: 4PC10365 User Capacity: 160,041,885,696 bytes [160 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Apr 30 21:48:39 2019 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED dpavlin@tab:~$ sudo hdparm -i /dev/sda /dev/sda: Model=INTEL SSDSA2BW160G3H, FwRev=4PC10365, SerialNo=BTPR144501A5160DGN Config={ Fixed } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=unknown, MaxMultSect=16, MultSect=1 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=312581808 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 AdvancedPM=no WriteCache=enabled Drive conforms to: unknown: ATA/ATAPI-2,3,4,5,6,7 * signifies the current active mode dpavlin@tab:~$ sudo hdparm -tT /dev/sda /dev/sda: Timing cached reads: 9340 MB in 2.00 seconds = 4675.95 MB/sec Timing buffered disk reads: 736 MB in 3.01 seconds = 244.74 MB/sec .pre ^ firmware update https://blog.cihar.com/archives/2012/07/13/intel-ssd-firmware-update-linux/ But modified for recent Debian kernels https://downloadcenter.intel.com/download/28749/Intel-SSD-Firmware-Update-Tool?v=t .pre dpavlin@x200:~$ unzip FirmwareUpdateTool_v3_0_7.zip -d FirmwareUpdateTool_v3_0_7 dpavlin@x200:~/FirmwareUpdateTool_v3_0_7$ sudo apt install grub-imageboot dpavlin@x200:~/FirmwareUpdateTool_v3_0_7$ cat /etc/default/grub-imageboot # Where to find the iso/floppy images IMAGES="/boot/images" # You can override the boot options for iso/floppy images here # see http://syslinux.zytor.com/wiki/index.php/MEMDISK for details #IMAGEOPTS="rawimg" #ISOOPTS="iso" dpavlin@x200:~/FirmwareUpdateTool_v3_0_7$ . /etc/default/grub-imageboot ; sudo mkdir -v $IMAGES mkdir: created directory '/boot/images' dpavlin@x200:~/FirmwareUpdateTool_v3_0_7$ sudo cp -v issdfut_64_3.0.7.iso /boot/images/ 'issdfut_64_3.0.7.iso' -> '/boot/images/issdfut_64_3.0.7.iso' dpavlin@x200:~/FirmwareUpdateTool_v3_0_7$ sudo update-grub Generating grub configuration file ... Found linux image: /boot/vmlinuz-4.19.0-4-amd64 Found initrd image: /boot/initrd.img-4.19.0-4-amd64 Found linux image: /boot/vmlinuz-4.19.0-2-amd64 Found initrd image: /boot/initrd.img-4.19.0-2-amd64 Found memdisk: /boot/memdisk Found iso image: /boot/images/issdfut_64_3.0.7.iso done .pre This doesn't boot on x200 dual-core for me. |