Dobrica Pavlinušić's random unstructured stuff
CJMCU-811: Revision 1
CJMCU-811 CCS811 Carbon Monoxide CO VOCs Air Quality Digital Gas Sensor
https://revspace.nl/CJMCU-811 ^ pins VCC this is directly connected to the IC (there is no voltage regulator on board), connect this to 3.3V GND to ground obviously SCL signal from I2C SDA signal from I2C WAK this needs to be low (!) in order for the chip to be active INT can be left unconnected RST can be left unconnected ADD can be left unconnected. It has a 10k pull-down to GND, setting the I2C address to 0x5A. |