Dobrica Pavlinušić's random unstructured stuff
CH341A mini flash programmer: Revision 19



ch341a_miniprogrammer.jpg

This is 5V device without modification! It works for me(tm) but you have been warned

http://www.eevblog.com/forum/repair/ch341a-serial-memory-programmer-power-supply-fix/

Just lift pin 28 and put some tape under it to prevent any short circuit. Then solder one wire from this pin to pin 2 of AMS1117 and also to C4. The side of the C4 to connect is the one connected to CH341A pin 9.

jumper on pins

1-2 SPI flash programmer mode
2-3 TTL serial mode

supported out-of-box by flashrom, probably better option, but anyway:

https://github.com/setarcos/ch341prog

dpavlin@nuc:/nuc/ch341a$ git clone https://github.com/setarcos/ch341prog
Cloning into 'ch341prog'...
remote: Counting objects: 104, done.
remote: Total 104 (delta 0), reused 0 (delta 0), pack-reused 104
Receiving objects: 100% (104/104), 34.79 KiB | 0 bytes/s, done.
Resolving deltas: 100% (61/61), done.
Checking connectivity... done.
dpavlin@nuc:/nuc/ch341a$ cd ch341prog/
dpavlin@nuc:/nuc/ch341a/ch341prog$ make
gcc -std=gnu99 -Wall ch341a.c main.c -o ch341prog  -lusb-1.0
dpavlin@nuc:/nuc/ch341a/ch341prog$ ./ch341prog 

Usage:
 -h, --help             display this message
 -i, --info             read the chip ID info
 -e, --erase            erase the entire chip
 -l, --length <bytes>   manually set length
 -w, --write <filename> write chip with data from filename
 -r, --read <filename>  read chip and save data to filename
 -t, --turbo            increase the i2c bus speed (-tt to use much faster speed)
 -d, --double           double the spi bus speed

I2C in userspace

https://sourceforge.net/projects/ch341eepromtool/

dpavlin@nuc:/nuc/ch341a/ch341eepromtool_0.5$ gcc -o ch341eeprom ch341eeprom.c ch341funcs.c -lusb-1.0
dpavlin@nuc:/nuc/ch341a/ch341eepromtool_0.5$ 
dpavlin@nuc:/nuc/ch341a/ch341eepromtool_0.5$ ./ch341eeprom 
ch341eeprom - an i2c EEPROM programming tool for the WCH CH341a IC
Version 0.5 copyright (c) 2011  asbokid <ballymunboy@gmail.com>

This program comes with asbolutely no warranty; This is free software,
and you are welcome to redistribute it under certain conditions:
GNU GPL v3 License: http://www.gnu.org/licenses/gpl.html

Usage:
 -h, --help             display this text
 -v, --verbose          verbose output
 -d, --debug            debug output
 -s, --size             size of EEPROM {24c32|24c64}
 -e, --erase            erase EEPROM (fill with 0xff)
 -w, --write <filename> write EEPROM with image from filename
 -r, --read  <filename> read EEPROM and save image to filename

Example:  ch341eeprom -v -s 24c64 -w bootrom.bin

flashrom SPI

Not needed anymore, included in mainline flashrom

git clone https://github.com/urjaman/flashrom/
git checkout -b origin/ch341a origin/ch341a

dpavlin@nuc:/nuc/flashrom$ sudo apt-get install pciutils-dev



linux kernel spi module

dpavlin@nuc:/nuc$ git clone https://github.com/gschorcht/spi-ch341-usb.git
Cloning into 'spi-ch341-usb'...
remote: Counting objects: 63, done.
remote: Total 63 (delta 0), reused 0 (delta 0), pack-reused 63
Unpacking objects: 100% (63/63), done.
dpavlin@nuc:/nuc$ cd spi-ch341-usb
dpavlin@nuc:/nuc/spi-ch341-usb$ make
make -C /usr/src/linux-headers-4.14.0-3-amd64/ M=/nuc/spi-ch341-usb  modules
make[1]: Entering directory '/usr/src/linux-headers-4.14.0-3-amd64'
  CC [M]  /nuc/spi-ch341-usb/spi-ch341-usb.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /nuc/spi-ch341-usb/spi-ch341-usb.mod.o
  LD [M]  /nuc/spi-ch341-usb/spi-ch341-usb.ko
make[1]: Leaving directory '/usr/src/linux-headers-4.14.0-3-amd64'
dpavlin@nuc:/nuc/spi-ch341-usb$ 
dpavlin@nuc:/nuc/spi-ch341-usb$ sudo make install
[sudo] password for dpavlin: 

dpavlin@nuc:/nuc/spi-ch341-usb$ sudo modprobe spi-ch341-usb

[525021.048281] spi-ch341-usb 2-2.1.4:1.0: ch341_cfg_probe: output cs0 SPI slave with cs=0
[525021.048285] spi-ch341-usb 2-2.1.4:1.0: ch341_cfg_probe: output cs1 SPI slave with cs=1
[525021.048287] spi-ch341-usb 2-2.1.4:1.0: ch341_cfg_probe: output cs2 SPI slave with cs=2
[525021.048290] spi-ch341-usb 2-2.1.4:1.0: ch341_cfg_probe: input  gpio4 gpio=0 irq=0 (hwirq)
[525021.048292] spi-ch341-usb 2-2.1.4:1.0: ch341_cfg_probe: input  gpio5 gpio=1 irq=1 
[525021.048296] spi-ch341-usb 2-2.1.4:1.0: ch341_spi_probe: SPI master connected to SPI bus 0
[525021.048426] spi-ch341-usb 2-2.1.4:1.0: ch341_spi_probe: SPI device /dev/spidev0.0 created
[525021.048516] spi-ch341-usb 2-2.1.4:1.0: ch341_spi_probe: SPI device /dev/spidev0.1 created
[525021.048596] spi-ch341-usb 2-2.1.4:1.0: ch341_spi_probe: SPI device /dev/spidev0.2 created
[525021.049147] spi-ch341-usb 2-2.1.4:1.0: ch341_usb_probe: connected
[525021.049194] usbcore: registered new interface driver spi-ch341-usb



linux kernel i2c module

schematics and info

ch341a_miniprogrammer_schematic.png