Dobrica Pavlinušić's random unstructured stuff
AVR component tester: Revision 7

fish8840

fish8840-usbasp-small.jpg

big board picture fish8840-usbasp.jpg


dpavlin@x200:/rest/cvs/transistortester$ git svn info
Path: .
URL: svn://mikrocontroller.net/transistortester
Repository Root: svn://mikrocontroller.net/transistortester
Repository UUID: 6ebdd44f-5a7e-449c-b779-36259138d2c7
Revision: 460
Node Kind: directory
Schedule: normal
Last Changed Author: kubi48
Last Changed Rev: 460
Last Changed Date: 2015-04-18 22:14:53 +0200 (Sat, 18 Apr 2015)


diff --git a/Software/trunk/mega328_fish8840/Makefile b/Software/trunk/mega328_fish8840/Makefile
index 9c106d0..6d3ee34 100644
--- a/Software/trunk/mega328_fish8840/Makefile
+++ b/Software/trunk/mega328_fish8840/Makefile
@@ -111,10 +111,10 @@ CFLAGS += -DLCD_ST7565_H_FLIP=1
 # OFFSET values can vary for the connected display type to 0, 2 or 4.
 CFLAGS += -DLCD_ST7565_H_OFFSET=0
 # If LCD_ST7565 option is set to 1: Flip the display's vertical direction
-#CFLAGS += -DLCD_ST7565_V_FLIP=1
+CFLAGS += -DLCD_ST7565_V_FLIP=1
 # The contrast value can be predefined with the constant VOLUME_VALUE
 # for ST7565 controller the value can be between 0 and 63, for the SSD1306 0 to 255 can be selected.
-#CFLAGS += -DVOLUME_VALUE=25
+CFLAGS += -DVOLUME_VALUE=50
 
 # If option WITH_LCD_ST7565 is present one of the following fonts should be
 # choosen. With a font width below 8 more than 16 characters can be shown in one display line.
@@ -308,13 +308,13 @@ INHIBIT_SLEEP_MODE = 0
 
 # Select your programmer type, speed and port, if you wish to use avrdude.
 # setting for DIAMEX ALL_AVR, Atmel AVRISP-mkII
-PROGRAMMER=avrispmkII
-BitClock=1.0
-PORT=usb
-# setting for USBasp
-#PROGRAMMER=usbasp
-#BitClock=20
+#PROGRAMMER=avrispmkII
+#BitClock=1.0
 #PORT=usb
+# setting for USBasp
+PROGRAMMER=usbasp
+BitClock=20
+PORT=usb
 # setting for ARDUINO MEGA, requires bootloader
 #PROGRAMMER=wiring
 #PORT = /dev/ttyACM0


dpavlin@x200:/rest/cvs/transistortester$ cd Software/trunk/mega328_fish8840/

dpavlin@x200:/rest/cvs/transistortester/Software/trunk$ vi default/ReadMe.txt

dpavlin@x200:/rest/cvs/transistortester/Software/trunk$ cd mega328_fish8840/

dpavlin@x200:/rest/cvs/transistortester/Software/trunk/mega328_fish8840$ make upload
make
make[1]: Entering directory '/rest/cvs/transistortester/Software/trunk/mega328_fish8840'

8 MHz operation configured.
AVR Memory Usage
----------------
Device: atmega328p

Program:   29994 bytes (91.5% Full)
(.text + .data + .bootloader)

Data:        193 bytes (9.4% Full)
(.data + .bss + .noinit)

EEPROM:       15 bytes (1.5% Full)
(.eeprom)


make[1]: Leaving directory '/rest/cvs/transistortester/Software/trunk/mega328_fish8840'
avrdude -c usbasp -B 20  -p m328p -P usb -U flash:w:./TransistorTester.hex:a \
-U eeprom:w:./TransistorTester.eep:a

avrdude: set SCK frequency to 32000 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e950f
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: set SCK frequency to 32000 Hz
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file "./TransistorTester.hex"
avrdude: input file ./TransistorTester.hex auto detected as Intel Hex
avrdude: writing flash (29994 bytes):

Writing | ################################################## | 100% 17.86s

avrdude: 29994 bytes of flash written
avrdude: verifying flash memory against ./TransistorTester.hex:
avrdude: load data flash data from input file ./TransistorTester.hex:
avrdude: input file ./TransistorTester.hex auto detected as Intel Hex
avrdude: input file ./TransistorTester.hex contains 29994 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 16.67s

avrdude: verifying ...
avrdude: 29994 bytes of flash verified
avrdude: reading input file "./TransistorTester.eep"
avrdude: input file ./TransistorTester.eep auto detected as Intel Hex
avrdude: writing eeprom (15 bytes):

Writing | ################################################## | 100% 0.19s

avrdude: 15 bytes of eeprom written
avrdude: verifying eeprom memory against ./TransistorTester.eep:
avrdude: load data eeprom data from input file ./TransistorTester.eep:
avrdude: input file ./TransistorTester.eep auto detected as Intel Hex
avrdude: input file ./TransistorTester.eep contains 15 bytes
avrdude: reading on-chip eeprom data:

Reading | ################################################## | 100% 0.04s

avrdude: verifying ...
avrdude: 15 bytes of eeprom verified

avrdude: safemode: Fuses OK (E:05, H:D9, L:F7)

avrdude done.  Thank you.



dpavlin@x200:/rest/cvs/transistortester/Software/trunk/mega328_fish8840$ make fuses-crystal
avrdude -c usbasp -B 20 -p m328p -P usb  -U lfuse:w:0xf7:m -U hfuse:w:0xd9:m -U efuse:w:0x04:m

avrdude: safemode: Fuses OK (E:04, H:D9, L:F7)