Quantus

EP1C needs Quantus II 11 web pack (last supported) in squeeze chroot


root@nuc:/nuc# debootstrap --arch i386 squeeze altera-squeeze http://archive.debian.org/debian

$ sudo mount blue:/bluez/FPGA/Altera-x300/11.0sp1_quartus_free_linux /nuc/altera-squeeze/mnt/


# mount /proc into chroot
# chroot into it


root@altera:/mnt$ bash setup --help

apt-get install -y `bash /mnt/setup --help 2>&1 | grep 'cannot open shared object file' | cut -d: -f2 | xargs -i ssh dpavlin@blue dpkg -S {} | grep i386 | cut -d: -f1 | head -1`


if setup dies, look at log in /tmp/ and continue installation of families:


  140  "/root/altera/11.0sp1/quartus/bin/quartus_sh" --qinstall -qda "/mnt/altera_installer/bin/../../devices/subscription/cyclone.qda" -show_qt_progress
  141  "/root/altera/11.0sp1/quartus/bin/quartus_sh" --qinstall -qda "/mnt/altera_installer/bin/../../devices/subscription/max3000a.qda" -show_qt_progress

try to start


root@altera:/$ /root/altera/11.0sp1/quartus/bin/quartus
quartus: error while loading shared libraries: libpng12.so.0: cannot open shared object file: No such file or directory

or http://download.altera.com/akdlm/software/acdsinst/13.0sp1/232/ib_installers/cyclone-13.0.1.232.qdz

Quartus II 13.0.1.232 tries to open following device files:

dpavlin@blue:/bluez/FPGA/Altera-x300$ grep qdz /tmp/foo 
lstat64("/bluez/FPGA/Altera-x300/arria_web-13.0.1.232.qdz", 0xff9b166c) = -1 ENOENT (No such file or directory)
lstat64("/bluez/FPGA/Altera-x300/cyclone_web-13.0.1.232.qdz", 0xff9b166c) = -1 ENOENT (No such file or directory)
lstat64("/bluez/FPGA/Altera-x300/cyclonev-13.0.1.232.qdz", 0xff9b166c) = -1 ENOENT (No such file or directory)
lstat64("/bluez/FPGA/Altera-x300/max_web-13.0.1.232.qdz", 0xff9b166c) = -1 ENOENT (No such file or directory)

pinout

https://docs.google.com/spreadsheets/d/1ecJCOOo5Ake2j6uSbuVpIuRWHWXim99me3aXbe0EV-o/edit?usp=sharing

JTAG

openocd

pi@picam /nuc/picam/x300-pci $ sudo openocd -f raspberrypi-native.cfg 
Open On-Chip Debugger 0.10.0-dev-00024-gd28ab08 (2015-09-12-02:20)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
BCM2835 GPIO config: tck = 4, tms = 27, tdi = 22, tdi = 17
BCM2835 GPIO config: trst = 18
trst_only separate trst_push_pull
adapter speed: 100 kHz
jtag
Info : BCM2835 GPIO JTAG/SWD bitbang driver
Info : JTAG only mode enabled (specify swclk and swdio gpio to add SWD mode)
Info : clock speed 100 kHz
Warn : There are no enabled taps.  AUTO PROBING MIGHT NOT WORK!!
Info : JTAG tap: auto0.tap tap/device found: 0x171280dd (mfg: 0x06e, part: 0x7128, ver: 0x1)
Warn : AUTO auto0.tap - use "jtag newtap auto0 tap -irlen 2 -expected-id 0x171280dd"
Error: IR capture error at bit 2, saw 0x3FFFFFFFFFFFFD55 not 0x...3
Warn : Bypassing JTAG setup events due to errors
Warn : gdb services need one or more targets defined

OK, let's try config:

# XXX dpavlin x300 pci
bcm2835gpio_jtag_nums 4 27 22 17

# not really used for altera jtag, but we have to define it to make openocd happy
bcm2835gpio_trst_num 18
# reset_config trst_only
reset_config none

adapter_khz 30
transport select jtag

jtag newtap x300pci tap -irlen 10 -expected-id 0x171280dd -irmask 0x3 -ircapture 0x1

urjtag bug with gpio pin 4

using urjtag has bug which doesn't allow usage of pin 4 for anything (DUH!)

following patch fixes this problem:

--- a/urjtag/src/tap/cable/gpio.c
+++ b/urjtag/src/tap/cable/gpio.c
@@ -45,11 +45,11 @@
 
 /* pin mapping */
 enum {
-    GPIO_TDI = 0,
+    GPIO_REQUIRED = 0,
+    GPIO_TDI,
     GPIO_TCK,
     GPIO_TMS,
-    GPIO_TDO,
-    GPIO_REQUIRED
+    GPIO_TDO
 };
 
 typedef struct {

run urjtag










pi@picam ~/x300-pci $ sudo jtag

jtag> cable gpio help
Usage: cable gpio tdi=<gpio_tdi> tdo=<gpio_tdo> tck=<gpio_tck> tms=<gpio_tms>

# it seems that tck pin is not accepted!
jtag> cable gpio tck=4 tdo=17 tms=27 tdi=22

jtag> cable gpio tms=27 tdi=22 tdo=17 tck=4

urjtag + usbblaster


jtag> cable usbblaster
Connected to libftdi driver.
jtag> detect
IR length: 10
Chain length: 1
Device Id: 00010111000100101000000011011101 (0x171280DD)
  Manufacturer: Altera (0x0DD)
  Part(0):      EPM7128AETC100 (0x7128)
  Stepping:     1
  Filename:     /usr/local/share/urjtag/altera/epm7128aetc100/epm7128aetc100


jtag> discovery

Detecting DR length for IR 0000000000 ... 288
Detecting DR length for IR 0000000111 ... 32
Detecting DR length for IR 0001010101 ... 288
Detecting DR length for IR 0001011001 ... 32


dpavlin@nuc:~$ cat epm3128-pins.sh 
( grep signal /usr/local/share/urjtag/altera/epm7128aetc100/epm7128aetc100
| echo -e "cable usbblaster\ndetect\ninstruction SAMPLE/PRELOAD\nshift ir\nshift dr\n$(cat | sed 's/^/get /')"
| sudo jtag ) | tee pins.`date +%Y-%m-%d_%H:%M:%S`



jtag> instruction usercode
jtag> shift ir
jtag> shift dr
jtag> dr
11111111111111111111111111111111 (0xFFFFFFFF)
jtag> 

jtag> instruction extest
jtag> shift ir
jtag> shift dr
jtag> dr
010010101000100010001101010010010010010001010101010010101001101001010101001100010010010010010010000110010010010010001010101001010010001010001101001010010101000110101111010111000001000010010001001001001000010001001010110010010011011011010110010010000001010010010010001001010001001001011010 (0x0000000000000000000000000000000000000000000000000000000036D648149225125A)
jtag> print
 No. Manufacturer              Part                 Stepping Instruction          Register                        
-------------------------------------------------------------------------------------------------------------------
   0 Altera                    EPM7128AETC100       1        EXTEST               BSR