Dobrica Pavlinušić's random unstructured stuff
Teckin SP22: Revision 9
Photos: https://photos.app.goo.gl/JBW4wv51Eb6RX1ej8 Board markings
PLD-PZ005-V1.9. wifi moduleTYWE2S pins on flat side (bottom)
3v3 pins on side with components
rst sonoff tasmotahttps://github.com/arendst/Sonoff-Tasmota/issues/3950 {"NAME":"Teckin","GPIO":[0,17,0,53,134,132,0,0,131,56,21,0,0],"FLAG":0,"BASE":52} enable user configdpavlin@nuc:/nuc/esp8266/Sonoff-Tasmota$ git diff diff --git a/platformio.ini b/platformio.ini index 59fab723..98d285fc 100755 --- a/platformio.ini +++ b/platformio.ini @@ -193,7 +193,7 @@ build_flags = ${core_active.build_flags} ; -DFIRMWARE_BASIC ; -DFIRMWARE_KNX_NO_EMULATION ; -DFIRMWARE_DISPLAYS -; -DUSE_CONFIG_OVERRIDE + -DUSE_CONFIG_OVERRIDE ; *** Fix espressif8266@1.7.0 induced undesired all warnings build_unflags = -Wall dpavlin@nuc:/nuc/esp8266/Sonoff-Tasmota$ vi sonoff/user_config_override.h Configure defaults for your device and build only sonoff firmware (we don't need all variants) builddpavlin@nuc:/nuc/esp8266/Sonoff-Tasmota$ platformio run -e sonoff flashingdpavlin@x200:/mnt/nuc/esp8266/esptool$ ./esptool.py --port /dev/ttyUSB2 write_flash 0x0 ../Sonoff-Tasmota/.pioenvs/sonoff/firmware.bin esptool.py v2.8-dev Serial port /dev/ttyUSB2 Connecting.... Detecting chip type... ESP8266 Chip is ESP8285 Features: WiFi, Embedded Flash Crystal is 26MHz MAC: dc:4f:22:ee:a2:4a Uploading stub... Running stub... Stub running... Configuring flash size... Auto-detected Flash size: 1MB Compressed 565472 bytes to 388329... Wrote 565472 bytes (388329 compressed) at 0x00000000 in 34.3 seconds (effective 131.8 kbit/s)... Hash of data verified. Leaving... Hard resetting via RTS pin... Remove bridge from IO0 to GND and test module. |