iKVM

Java remote console client ftp://ftp.supermicro.com/utility/IPMIView/Linux/

ftp://ftp.supermicro.com/utility/IPMIView/Jar/IPMIView20-Class_v2.8.0_Build110802.zip

Real installation is endless pain and won't work (for me).

dpavlin@klin:/opt$ wget ftp://ftp.supermicro.com/utility/IPMIView/Jar/IPMIView2-Class_v2.8.0_Build110802.zip

dpavlin@klin:/opt$ unzip IPMIView20-Class_v2.8.0_Build110802.zip -d IPMIView

dpavlin@klin:/opt$ cd IPMIView/

dpavlin@klin:/opt/IPMIView$ chmod 755 IPMIView20.sh

According to http://www.mcgill.org.za/stuff/archives/340 you should be able to run KVM stand alone:

java -cp .:::::$PWD/iKVM.jar:$PWD/IPMIView20.jar:$PWD/TrapView.jar:::::: \
	-Djava.library.path=. \
	-D tw.com.aten.ikvm.KVMMain \
	$IP $USERNAME $PASSWORD null 5900 623 2 0

java -Djava.library.path=. -jar iKVM.jar \
  $IP $USERNAME $PASSWORD null 5900 623 2 0

Infiniband

http://inqbus-hosting.de/support/dokumentation/docs/debian-infiniband-howto

dpavlin@porn:~$ dmesg | grep ib
[    0.000000] Fast TSC calibration using PIT
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6185.92 BogoMIPS (lpj=12371840)
[    0.764371] vgaarb: bridge control possible 0000:06:03.0
[    1.261922] PM: Hibernation image not present or could not be loaded.
[    1.311730] libata version 3.00 loaded.
[    1.948194] Refined TSC clocksource calibration: 3092.973 MHz.
[   17.345807] ib_mthca: Mellanox InfiniBand HCA driver v1.0 (April 4, 2008)
[   17.345810] ib_mthca: Initializing 0000:04:00.0
[   17.345827] ib_mthca 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   17.345841] ib_mthca 0000:04:00.0: setting latency timer to 64
[   18.547370] ib_mthca 0000:04:00.0: HCA FW version 4.7.600 is old (4.8.200 is current).
[   18.547373] ib_mthca 0000:04:00.0: If you have problems, try updating your HCA FW.
[   18.547538] ib_mthca 0000:04:00.0: irq 51 for MSI/MSI-X
[   18.547542] ib_mthca 0000:04:00.0: irq 52 for MSI/MSI-X
[   18.547546] ib_mthca 0000:04:00.0: irq 53 for MSI/MSI-X
dpavlin@porn:~$ cat /sys/class/infiniband/mthca0/ports/1/state
4: ACTIVE
dpavlin@porn:~$ cat /sys/class/infiniband/mthca0/ports/1/rate
20 Gb/sec (4X DDR)
dpavlin@porn:~$ cat /sys/class/infiniband/mthca0/ports/1/phys_state
5: LinkUp
dpavlin@porn:~$ cat /sys/class/infiniband/mthca0/ports/2/phys_state
2: Polling

ZFS

disks seem to move from boot to boot so we need to specify disks for pool using persistant IDs:

zpool create -f test raidz3 `ls /dev/disk/by-id/ata-Hitachi_HDS723030ALA640_MK03* | grep -v part`