USB driver

http://rmdir.de/~michael/xilinx/

dpavlin@blue:/blue-zfs/FPGA/S3A$ git clone git://git.zerfleddert.de/usb-driver
dpavlin@blue:/blue-zfs/FPGA/S3A$ cd usb-driver/
dpavlin@blue:/blue-zfs/FPGA/S3A/usb-driver$ make
cc -Wall -fPIC -DUSB_DRIVER_VERSION="\"2013-06-18 23:37:15\""  -DJTAGKEY usb-driver.c xpcu.c parport.c config.c jtagmon.c jtagkey.c -o libusb-driver.so -ldl -lusb -lpthread -L/usr/lib/x86_64-linux-gnu -lftdi -lusb -shared
parport.c: In function ‘parport_transfer’:
parport.c:21:23: warning: variable ‘last_pp_write’ set but not used [-Wunused-but-set-variable]
  static unsigned char last_pp_write = 0;
                       ^
cc -DDEBUG -Wall -fPIC -DUSB_DRIVER_VERSION="\"2013-06-18 23:37:15\""  -DJTAGKEY usb-driver.c xpcu.c parport.c config.c jtagmon.c jtagkey.c -o libusb-driver-DEBUG.so -ldl -lusb -lpthread -L/usr/lib/x86_64-linux-gnu -lftdi -lusb -shared
Built library is 64 bit. Run `make lib32' to build a 32 bit version
dpavlin@blue:/blue-zfs/FPGA/S3A/usb-driver$ ./setup_pcusb /blue-zfs/Xilinx/14.5/ISE_DS/ISE/
You are not root, trying sudo...
Looking for USB cable files: /blue-zfs/Xilinx/14.5/ISE_DS/ISE//bin/lin64
Copying firmware to /usr/share:
‘/blue-zfs/Xilinx/14.5/ISE_DS/ISE//bin/lin64/xusbdfwu.hex’ -> ‘/usr/share/xusbdfwu.hex’
‘/blue-zfs/Xilinx/14.5/ISE_DS/ISE//bin/lin64/xusb_emb.hex’ -> ‘/usr/share/xusb_emb.hex’
‘/blue-zfs/Xilinx/14.5/ISE_DS/ISE//bin/lin64/xusb_xlp.hex’ -> ‘/usr/share/xusb_xlp.hex’
‘/blue-zfs/Xilinx/14.5/ISE_DS/ISE//bin/lin64/xusb_xp2.hex’ -> ‘/usr/share/xusb_xp2.hex’
‘/blue-zfs/Xilinx/14.5/ISE_DS/ISE//bin/lin64/xusb_xpr.hex’ -> ‘/usr/share/xusb_xpr.hex’
‘/blue-zfs/Xilinx/14.5/ISE_DS/ISE//bin/lin64/xusb_xse.hex’ -> ‘/usr/share/xusb_xse.hex’
‘/blue-zfs/Xilinx/14.5/ISE_DS/ISE//bin/lin64/xusb_xup.hex’ -> ‘/usr/share/xusb_xup.hex’
Installing udev rules:
done

# install fxload
sudo apt-get install fxload