Dobrica Pavlinušić's random unstructured stuff
Printrbot Plus: Revision 52
PrintrBot_Plus_LC.diff
Printrboard-schematics.pdf
Old 3D printer which never worked well.
https://web.archive.org/web/20130115210644/http://printrbot.com/shop/plus/
PrintrBot Plus LC
The Printrbot PLUS is the larger printrbot kit–containing an 8x8x8 build volume, laser cut birch construction, an assembled Ubis hot end, and 12mm Z-axis rods in an all-in-one kit. This kit also includes 1 lb of ABS filament.
This kit includes everything you need to build the printrbot PLUS:
- printrboard: all-in-one assembled electronics with integrated SD card slot (no soldering required)
- 5 NEMA 17 stepper motors complete with cable ends attached
- laser cut birch construction
- a few printed plastic parts (gears, etc)
- WOOD Extruder Kit
- hardware (8mm smooth rods, threaded rods, and bearings
- Z axis is 12mm smooth rods and 12 mm linear bearings )
- assembled Ubis hot end
- nuts, bolts, washers, zip ties
- laser cut print bed
- 8×8 heated bed
- misc assembled cables (no soldering required)
- 3 mechanical end stops (no soldering required)
- micro USB cable
nozzle
The Getting Started Guide says that all Printrbots currently ship with 0.4mm nozzles.
The convention for identifying nozzles is based on notches (or "rings") cut into the sides (vertices) of the hexagonal brass "nut".
No notch = 0.5mm
1 notch = 0.4mm
2 notches = 0.35mm
info
Most of information about it vanished from internet so here is some overview:
Rev.B https://github.com/Printrbot/printrboard/releases/tag/revB
PrintrBoard pinout
Annotated headers from http://blog.think3dprint3d.com/2012/07/panelolu-with-printrboard.html
serial
[Sun Mar 18 08:23:50 2018] usb 2-4.4: new full-speed USB device number 61 using xhci_hcd [Sun Mar 18 08:23:50 2018] usb 2-4.4: New USB device found, idVendor=16c0, idProduct=0483 [Sun Mar 18 08:23:50 2018] usb 2-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Sun Mar 18 08:23:50 2018] usb 2-4.4: Product: USB Serial [Sun Mar 18 08:23:50 2018] usb 2-4.4: Manufacturer: Teensyduino [Sun Mar 18 08:23:50 2018] usb 2-4.4: SerialNumber: 12345 [Sun Mar 18 08:23:50 2018] cdc_acm 2-4.4:1.0: ttyACM0: USB ACM device dpavlin@nuc:~$ microcom p /dev/ttyACM0 connected to /dev/ttyACM0 Escape character: Ctrl\ Type the escape character to get to the prompt. start echo:PowerUp Brown out Reset Marlin: 1.0.0 RC2 echo: Last Updated: 2012-02-25 | Author: erik echo: Free Memory: 4907 Pla echo:SD init fail workDir open failed echo:Unknown command:"echo" ok echo:Unknown command:"SD init fail" ok echo:Unknown command:"workDir open failed" ok
settings
https://github.com/Printrbot/Marlin
M501 echo:Stored settings retreived: echo:Steps per unit: echo: M92 X62.11 Y64.67 Z2272.72 E536.00 echo:Maximum feedrates (mm/s): echo: M203 X60.00 Y60.00 Z2.00 E14.00 echo:Maximum Acceleration (mm/s2): echo: M201 X2000 Y2000 Z30 E10000 echo:Acceleration: S=acceleration, T=retract acceleration echo: M204 S3000.00 T3000.00 echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum xY jerk (mm/s), Z=maximum Z jerk (mm/s) echo: M205 S0.00 T0.00 B20000 X20.00 Z0.40 E5.00 echo:PID settings: echo: M301 P22.20 I1.08 D114.00 M115 FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1
software bed leveler
schematics
Printrboard_RevB_Schematic150.pngPrintrboard-schematics.pdf
Marlin
dpavlin@nuc:/nuc/PrintrBot$ git clone https://github.com/dpavlin/Marlin dpavlin@nuc:/nuc/PrintrBot$ cd Marlin/
compile Marlin 1.1.8
https://github.com/dpavlin/Marlin/tree/PrintrBot_Plus_LC-1.1.8
dpavlin@nuc:/nuc/PrintrBot/Marlin$ git checkout PrintrBot_Plus_LC-1.1.8 dpavlin@nuc:/nuc/PrintrBot/Marlin$ platformio run -e printrboard Warning! Ignore unknown `envs_dir` option in `[platformio]` section Processing printrboard (platform: teensy; board: teensy20pp; framework: arduino) ----------------------------------------------------------------------------------------------------------------------- Verbose mode can be enabled via `-v, --verbose` option PLATFORM: Teensy > Teensy++ 2.0 SYSTEM: AT90USB1286 16MHz 8KB RAM (127KB Flash)
compile Marlin 1.1.9
different enviroment compared to 1.1.8?
dpavlin@nuc:/nuc/PrintrBot/Marlin$ git checkout PrintrBot_Plus_LC-1.1.9 dpavlin@nuc:/nuc/PrintrBot/Marlin$ platformio run -e teensy20
flashing
open boot jumper, press button
[Sun Apr 15 12:20:34 2018] usb 1-1.1: new full-speed USB device number 30 using xhci_hcd
[Sun Apr 15 12:20:34 2018] usb 1-1.1: unable to get BOS descriptor
[Sun Apr 15 12:20:34 2018] usb 1-1.1: New USB device found, idVendor=03eb, idProduct=2ffb
[Sun Apr 15 12:20:34 2018] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Sun Apr 15 12:20:34 2018] usb 1-1.1: Product: AT90USB128 DFU
[Sun Apr 15 12:20:34 2018] usb 1-1.1: Manufacturer: ATMEL
[Sun Apr 15 12:20:34 2018] usb 1-1.1: SerialNumber: 1.0.0
root@nuc:/nuc/PrintrBot/Marlin# apt-get install dfu-programmer
root@nuc:/nuc/PrintrBot/Marlin# dfu-programmer --targets 2>&1 | grep at90usb128
at89c5132 at90usb1287 at90usb1286 at90usb1287-4k
at90usb1286-4k at90usb647 at90usb646 at90usb162
root@nuc:/nuc/PrintrBot/Marlin# dfu-programmer at90usb1286 dump --debug 99
target: at90usb1286
chip_id: 0x2ffb
vendor_id: 0x03eb
command: dump
quiet: false
debug: 99
device_type: AVR
------ command specific below ------
commands.c:625: dump 122880 bytes
atmel.c:579: atmel_read_flash( 0x7ffe83facaf0, 0x00000000, 0x0001e000, 0x564ef5df7000, 122880, false )
atmel.c:847: atmel_select_page( 0x7ffe83facaf0, 0 )
atmel.c:510: __atmel_read_page( 0x7ffe83facaf0, 0, 65536, 0x564ef5df7000, false )
atmel.c:537: result: -9
Unknown error. Try enabling debug.
Failed to read 122880 bytes from device.
other useful debug levels are 100, 200, 300 - https://www.avrfreaks.net/forum/how-use-dfu-programmer
hmmm... can't backup firmware?
flash firmware
dpavlin@nuc:/nuc/PrintrBot/Marlin$ dfu-programmer at90usb1286 erase
dpavlin@nuc:/nuc/PrintrBot/Marlin$ dfu-programmer at90usb1286 flash .pioenvs/printrboard/firmware.hex
Validating...
Flash did not validate. Did you erase first?
dpavlin@nuc:/nuc/PrintrBot/Marlin$ dfu-programmer at90usb1286 erase --debug 100
target: at90usb1286
chip_id: 0x2ffb
vendor_id: 0x03eb
command: erase
quiet: false
debug: 100
device_type: AVR
------ command specific below ------
validate: true
commands.c:69: erase 122879 bytes
atmel.c:281: atmel_erase_flash( 0x7ffc5df9bff0, 4 )
atmel.c:671: atmel_blank_check( 0x7ffc5df9bff0, 0x00000000, 0x0001dfff )
atmel.c:847: atmel_select_page( 0x7ffc5df9bff0, 0 )
atmel.c:647: __atmel_blank_check_internal( 0x7ffc5df9bff0, 0x00000000, 0x0000ffff )
atmel.c:847: atmel_select_page( 0x7ffc5df9bff0, 1 )
atmel.c:647: __atmel_blank_check_internal( 0x7ffc5df9bff0, 0x00000000, 0x0000dfff )
teensy setup pjrc
udev rule: https://www.pjrc.com/teensy/49-teensy.rules
loader: https://github.com/PaulStoffregen/teensy_loader_cli
unlock chip using flip
It seems that chip is protected. However, trying to erase and program it did destry data in it (expect bootloader) for some reason, and it seem that dfu-programmer doesn't know how to work with protection features.
So, next step is to try atmel's flip under linux but this also doesn't work well.
- patch path to /dev/bus/usb/ - https://www.avrfreaks.net/forum/instructions-get-batchisp-working-ubuntu-lucid-1004?name=PNphpBB2&file=viewtopic&t=97673
root@nuc:/nuc/PrintrBot/flip.3.2.1# cat debian-install.sh sudo apt-get install openjdk-9-jre:i386 libusb-0.1-4:i386 root@nuc:/nuc/PrintrBot/flip.3.2.1# cat env.sh export JAVA_HOME=/usr/lib/jvm/java-9-openjdk-i386/ export FLIP_HOME=/nuc/PrintrBot/flip.3.2.1/bin/ root@nuc:/nuc/PrintrBot/flip.3.2.1# cd bin/ root@nuc:/nuc/PrintrBot/flip.3.2.1/bin# cp -apv libatlibusbdfu.so libatlibusbdfu.so.orig root@nuc:/nuc/PrintrBot/flip.3.2.1/bin# sed 's/\/sys\/bus\/usb/\/dev\/bus\/usb/g' libatlibusbdfu.so.orig > libatlibusbdfu.so # run from bin directory or it won't work (?!) root@nuc:/nuc/PrintrBot/flip.3.2.1/bin# ./flip.sh
avrdude
made cable to convert 10 pin ICSP on usbasp to 6 pin ICSP on printrboard
http://reprap.org/wiki/Printrboard#Bootloaders
Pin 1 (not red wire on my harness because of re-wiring) is closest to the SD card slot.
root@nuc:/nuc/PrintrBot# avrdude -p usb1286 -c usbasp avrdude: warning: cannot set sck period. please check for usbasp firmware update. avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## | 100% 0.00s avrdude: Device signature = 0x1e9782 (probably usb1287) avrdude: safemode: Fuses OK (E:F3, H:99, L:5E) avrdude done. Thank you.
ok, factory bootloader
fuses
# disable jtag
avrdude -c usbtiny -p at90usb1286 -U lfuse:w:0xde:m -U hfuse:w:0xdb:m -U efuse:w:0xf0:m
# enabled jtag
avrdude -c usbtiny -p at90usb1286 -U lfuse:w:0xDE:m -U hfuse:w:0x9B:m -U efuse:w:0xF0:m
root@nuc:/nuc/PrintrBot# avrdude -c usbtiny -p at90usb1286 -U lfuse:w:0xde:m -U hfuse:w:0xdb:m -U efuse:w:0xf0:m
avrdude: Error: Could not find USBtiny device (0x1781/0xc9f)
avrdude done. Thank you.
root@nuc:/nuc/PrintrBot# avrdude -c usbasp -p at90usb1286 -U lfuse:w:0xde:m -U hfuse:w:0xdb:m -U efuse:w:0xf0:m
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9782 (probably usb1287)
avrdude: reading input file "0xde"
avrdude: writing lfuse (1 bytes):
Writing | | 0% 0.00s ***failed;
Writing | ################################################## | 100% 0.06s
avrdude: 1 bytes of lfuse written
avrdude: verifying lfuse memory against 0xde:
avrdude: load data lfuse data from input file 0xde:
avrdude: input file 0xde contains 1 bytes
avrdude: reading on-chip lfuse data:
Reading | ################################################## | 100% 0.00s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0x5e != 0xde
avrdude: verification error; content mismatch
avrdude: safemode: lfuse changed! Was de, and is now 5e
[Tue Apr 17 07:12:19 2018] usb 1-1.4: USB disconnect, device number 20
[Tue Apr 17 07:12:19 2018] usb 1-1.4: USB disconnect, device number 20
Would you like this fuse to be changed back? [y/n]
Would you like this fuse to be changed back? [y/n] n
avrdude: safemode: Fuses OK (E:F3, H:99, L:DE)
avrdude done. Thank you.
root@nuc:/nuc/PrintrBot# avrdude -p usb1286 -c usbasp
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9782 (probably usb1287)
avrdude: safemode: Fuses OK (E:F3, H:99, L:5E)
avrdude done. Thank you.
flash bootloader
huh, hum, program bootloader anyway from http://blog.lincomatic.com/?p=548
root@nuc:/nuc/PrintrBot# avrdude -p usb1286 -c usbasp -U flash:w:BootloaderDFU.hex
power cycle, return jumper re-try programming fuses
root@nuc:/nuc/PrintrBot# avrdude -c usbasp -p at90usb1286 -U lfuse:w:0xDE:m -U hfuse:w:0x9B:m -U efuse:w:0xF0:m
dfu programming works
re-try dfu programming
root@nuc:/nuc/PrintrBot# dfu-programmer at90usb1286 erase root@nuc:/nuc/PrintrBot# dfu-programmer at90usb1286 flash Marlin/.pioenvs/printrboard/firmware.hex Validating... 61322 bytes used (49.90%)
avrdude programming
dpavlin@nuc:/nuc/PrintrBot/Marlin$ avrdude -c usbasp -p usb1286 -U flash:w:.pioenvs/printrboard/firmware.hex
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9782 (probably usb1287)
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: warning: cannot set sck period. please check for usbasp firmware update.
avrdude: reading input file ".pioenvs/printrboard/firmware.hex"
avrdude: input file .pioenvs/printrboard/firmware.hex auto detected as Intel Hex
avrdude: writing flash (87280 bytes):
Writing | ################################################## | 100% 58.04s
avrdude: 87280 bytes of flash written
avrdude: verifying flash memory against .pioenvs/printrboard/firmware.hex:
avrdude: load data flash data from input file .pioenvs/printrboard/firmware.hex:
avrdude: input file .pioenvs/printrboard/firmware.hex auto detected as Intel Hex
avrdude: input file .pioenvs/printrboard/firmware.hex contains 87280 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 38.49s
avrdude: verifying ...
avrdude: 87280 bytes of flash verified
avrdude: safemode: Fuses OK (E:F0, H:9B, L:DE)
avrdude done. Thank you.
RepRapDiscount Full Graphic Smart Controller
pinouts
printrboard-lcd-pinout.pngHardware upgrade
- RAMPS1.4 LCD 12864 Control Panel 3D Printer Smart Controller LCD Display $10
- https://www.aliexpress.com/item/1-pcs-RAMPS1-4-LCD-12864-Control-Panel-3D-Printer-Smart-Controller-LCD-Display-Free-Shipping/32312042967.html
- $10 - works well, needs custom cable, well worth it from usability perspective
- 10pcs/lot LM8UU Ball Bearings 8mm Bushing For CNC 3D Printers Parts Rail Linear Long Rod Shaft Part 8mm*15mm*24mm Aluminum Bush
- https://www.aliexpress.com/item/10pcs-lot-LM8UU-Ball-Bearings-8mm-Bushing-For-CNC-3D-Printers-Parts-Rail-Linear-Long-Rod/32834729285.html?spm=a2g0s.9042311.0.0.27424c4dYG3yco
- NOT recomended, worse that original VXB.com -- seller specified brand as FYSETC, parts don't have any markings
