loader

https://github.com/GadgetFactory/Papilio-Loader/pull/6

dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone https://github.com/GadgetFactory/Papilio-Loader.git
dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd Papilio-Loader/papilio-prog
dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ git checkout -b revert-libftdi2 261d0dd02f5489c63e8227c6f916af5efacfbe7a
dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./autogen.sh 
dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./configure && make

ZAP IDE

dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone https://github.com/GadgetFactory/ZAP--ZPUino-Arduino-Papilio--IDE.git

dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd ZAP--ZPUino-Arduino-Papilio--IDE/build/
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build$ ant

dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux$ ln -s zpu_tools_linux32.tar.bz2 zpu_tools_linux64.tar.bz2

Compilation works, but programming doesn't with error:

Board: Unknown board @ 96000000 Hz (0xa4041700)

so, let's rebuild zpuprogrammer

http://forum.gadgetfactory.net/index.php?/topic/1588-how-to-program-the-arduino-sketch-for-zpuino-to-the-spi-flash/page-2#entry11242

dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ git remote -v
origin  https://github.com/alvieboy/ZPUino-HDL/ (fetch)
origin  https://github.com/alvieboy/ZPUino-HDL/ (push)

dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ autoreconf --install
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ ./configure
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ make
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ cp zpuinoprogrammer /blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/dist/tools/
# this one is for already built version
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ cp zpuinoprogrammer /blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work/hardware/tools/zpu/bin/zpuinoprogrammer

program boot file (IDE doesn't have permission to do so)

dpavlin@blue:/blue-zfs/FPGA/Papilio$ ./papilio-prog -v -f ./zap-2.0.5/hardware/zpuino/zpu/bootloaders/lx9/zpuino-1.0-PapilioPro-S6LX9-RetroCade-1.0.bit
Using built-in device list
JTAG chainpos: 0 Device IDCODE = 0x24001093     Desc: XC6SLX9
Created from NCD file: papilio_pro_routed.ncd;UserID=0xFFFFFFFF
Target device: 6slx9tqg144
Created: 2012/11/20 00:16:43
Bitstream length: 2727072 bits

Uploading "./zap-2.0.5/hardware/zpuino/zpu/bootloaders/lx9/zpuino-1.0-PapilioPro-S6LX9-RetroCade-1.0.bit". DNA is 0x190efd25eb57c9fe
Done.
Programming time 549.2 ms
USB transactions: Write 176 read 8 retries 5

run IDE

dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ ./arduino
Experimental:  JNI_OnLoad called.
Stable Library
=========================================
Native lib Version = RXTX-2.1-7
Java lib Version   = RXTX-2.1-7

verification will fail, so just upload sketch:

dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-SOC/zpu/hdl/zpuino/programmer$ ./zpuinoprogrammer -s 1000000 -R -d /dev/ttyUSB1 -b /tmp/build383944339812357036.tmp/Autoscroll.cpp.bin -U
Board: GadgetFactory Papilio Pro LX9 @ 96000000 Hz (0xa4041700)
Upload completed successfully in 0.05 seconds.