|
Dobrica Pavlinušić's random unstructured stuff
Raspdancer: Revision 7
{toc}
^ Raspidancer Facedancer on [RaspberryPi] http://wiki.yobi.be/wiki/Raspdancer Newer software https://github.com/ktemkin/Facedancer Schema: http://wiki.yobi.be/images/1/18/Raspdancer21_v10_sch.png .pre pi@picam ~ $ git clone https://github.com/ktemkin/Facedancer pi@picam ~ $ git clone https://github.com/lthiery/SPI-Py Cloning into 'SPI-Py'... remote: Counting objects: 81, done. remote: Total 81 (delta 0), reused 0 (delta 0), pack-reused 81 Unpacking objects: 100% (81/81), done. Checking connectivity... done. pi@picam ~ $ cd SPI-Py/ pi@picam ~/SPI-Py $ sudo apt-get install python3-dev pi@picam ~/SPI-Py $ python3 setup.py build pi@picam ~/SPI-Py $ sudo python3 setup.py install pi@picam ~/Facedancer $ export BACKEND=raspdancer pi@picam ~/Facedancer $ sudo -E ./facedancer-serial.py pi@picam ~/Facedancer $ sudo -E ./facedancer-serial.py Using MAXUSB backend. MAXUSB initialized MAXUSB enabled MAXUSB revision 0 <facedancer.backends.RaspdancerMaxUSBApp.RaspdancerMaxUSBApp object at 0xb6a67710> MAXUSB connected device USB Serial device .pre ^ USB Host Shield for Arduino Pro Mini http://shop.tkjelectronics.dk/product_info.php?cPath=22&products_id=45 Schema: http://www.tkjelectronics.dk/uploads/usbhost/UHS_mini_10.pdf ^^ problems * VBCOMP is not routed on this board * VBUS (usb VCC) is 3.3V not 5V ^ MAX3421 kernel module * https://github.com/notro/rpi-source/wiki |