https://github.com/GadgetFactory/Papilio-Loader/pull/6
dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone https://github.com/GadgetFactory/Papilio-Loader.git dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd Papilio-Loader/papilio-prog dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ git checkout -b revert-libftdi2 261d0dd02f5489c63e8227c6f916af5efacfbe7a dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./autogen.sh dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./configure && make # check compiled binary dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-Loader/papilio-prog$ ./papilio-prog -v -j Using built-in device list JTAG chainpos: 0 Device IDCODE = 0x24001093 Desc: XC6SLX9 USB transactions: Write 3 read 2 retries 1
dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone https://github.com/GadgetFactory/ZAP--ZPUino-Arduino-Papilio--IDE.git dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd ZAP--ZPUino-Arduino-Papilio--IDE/build/ dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build$ ant dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux$ ln -s zpu_tools_linux32.tar.bz2 zpu_tools_linux64.tar.bz2
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ vi ./hardware/zpuino/zpu/platform.txt
# fix papilioprog to papilio-prog
tools.papilioprog.cmd=papilio-prog
# remove .exe from this line
tools.papilioprog.erase.pattern="{path}/bin/papilio-prog" -c
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ chmod 755 hardware/tools/papilio/papilio_loader/Papilio_Programmer.sh
# copy compiled papilio-prog to correct location and fix permissions
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ cp ../../../../Papilio-Loader/papilio-prog/papilio-prog hardware/tools/papilio/papilio_loader/bin/
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ chmod 755 hardware/tools/papilio/papilio_loader/bin/papilio-prog
Run arduino GUI:
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ ./arduino
Compilation works, but programming doesn't with error:
Board: Unknown board @ 96000000 Hz (0xa4041700)
so, let's rebuild zpuprogrammer
dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ git remote -v origin https://github.com/alvieboy/ZPUino-HDL/ (fetch) origin https://github.com/alvieboy/ZPUino-HDL/ (push) dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ autoreconf --install dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ ./configure dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ make dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ cp zpuinoprogrammer /blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/dist/tools/ # this one is for already built version dpavlin@blue:/blue-zfs/ZPUino/ZPUino-HDL/zpu/hdl/zpuino/programmer$ cp zpuinoprogrammer /blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work/hardware/tools/zpu/bin/zpuinoprogrammer
program boot file (IDE doesn't have permission to do so)
dpavlin@blue:/blue-zfs/FPGA/Papilio$ ./papilio-prog -v -f ./zap-2.0.5/hardware/zpuino/zpu/bootloaders/lx9/zpuino-1.0-PapilioPro-S6LX9-RetroCade-1.0.bit Using built-in device list JTAG chainpos: 0 Device IDCODE = 0x24001093 Desc: XC6SLX9 Created from NCD file: papilio_pro_routed.ncd;UserID=0xFFFFFFFF Target device: 6slx9tqg144 Created: 2012/11/20 00:16:43 Bitstream length: 2727072 bits Uploading "./zap-2.0.5/hardware/zpuino/zpu/bootloaders/lx9/zpuino-1.0-PapilioPro-S6LX9-RetroCade-1.0.bit". DNA is 0x190efd25eb57c9fe Done. Programming time 549.2 ms USB transactions: Write 176 read 8 retries 5
run IDE
dpavlin@blue:/blue-zfs/FPGA/Papilio/ZAP--ZPUino-Arduino-Papilio--IDE/build/linux/work$ ./arduino Experimental: JNI_OnLoad called. Stable Library ========================================= Native lib Version = RXTX-2.1-7 Java lib Version = RXTX-2.1-7
verification will fail, so just upload sketch:
dpavlin@blue:/blue-zfs/FPGA/Papilio/Papilio-SOC/zpu/hdl/zpuino/programmer$ ./zpuinoprogrammer -s 1000000 -R -d /dev/ttyUSB1 -b /tmp/build383944339812357036.tmp/Autoscroll.cpp.bin -U Board: GadgetFactory Papilio Pro LX9 @ 96000000 Hz (0xa4041700) Upload completed successfully in 0.05 seconds.
dpavlin@blue:/blue-zfs/FPGA/Papilio$ git clone git://repo.or.cz/zpugcc.git Cloning into 'zpugcc'... remote: Counting objects: 35519, done. remote: Compressing objects: 100% (26110/26110), done. remote: Total 35519 (delta 8445), reused 35519 (delta 8445) Receiving objects: 100% (35519/35519), 70.18 MiB | 426.00 KiB/s, done. Resolving deltas: 100% (8445/8445), done. Checking connectivity... done. Checking out files: 100% (35311/35311), done. dpavlin@blue:/blue-zfs/FPGA/Papilio$ cd zpugcc/toolchain dpavlin@blue:/blue-zfs/FPGA/Papilio/zpugcc/toolchain$ git diff build.sh diff --git a/toolchain/build.sh b/toolchain/build.sh index 783beaa..034929c 100644 --- a/toolchain/build.sh +++ b/toolchain/build.sh @@ -3,6 +3,9 @@ set -e rm -rf build mkdir build cd build +mkdir bin +ln -s /bin/true bin/makeinfo +export PATH=`pwd`/bin:$PATH ../binutils/configure --target=zpu-elf --prefix=`pwd`/../install make make install dpavlin@blue:/blue-zfs/FPGA/Papilio/zpugcc/toolchain$ sh -x build.sh
http://retrocade.gadgetfactory.net/index.php?n=Main.RetroCadeMegaWing
Modify Examples/LiqueidCrystal/Autoscroll
// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(26, 24, 23, 22, 21, 20);
void setup() {
// contrast to GND
pinMode(46, OUTPUT);
digitalWrite(46, LOW);
// RW to ground
pinMode(25, OUTPUT);
digitalWrite(25, LOW);
// set up the LCD's number of columns and rows:
lcd.begin(16,2);
}