http://code.google.com/p/crapto1/
http://www.youtube.com/watch?v=kTvb7tjbSTI
http://www.fuzzysecurity.com/tutorials/rfid/3.html
Proxmark firmware comparison on emulated Mifare 4k
| r | command | note |
| 590 | USB HID | |
| hf mf rdbl 0 A a0a1a2a3a4a5 | OK | |
| hf mf chk 0 A a0a1a2a3a4a5 | Can't select card | |
| 617 | USB HID | |
| hf mf rdbl 0 A a0a1a2a3a4a5 | OK | |
| hf mf chk 0 A a0a1a2a3a4a5 | Can't select card | |
| hf mf mifare | 2 red, needs power cycle | |
| hf mf nested o 0 a a0a1a2a3a4a5 4 t | Can't select card | |
| 672 | proxendian.h:22:4: error: #error Define BYTE_ORDER | |
| 756 | USB CCID | |
| hf mf rdbl 0 A a0a1a2a3a4a5 | Auth error | |
| hf mf chk 0 A a0a1a2a3a4a5 | Can't select card | |
| hf mf mifare | red, yellow, red, needs power cycle | |
| hf mf nested o 0 a a0a1a2a3a4a5 4 t | Can't select card | |
| 840 | latest | |
| hf mf rdbl 0 A a0a1a2a3a4a5 | Can't select card | |
| hf mf chk 0 A a0a1a2a3a4a5 | Can't select card | |
| hf mf mifare | Can't select card | |
| hf mf nested o 0 a a0a1a2a3a4a5 4 t | Can't select card |
proxmark3> hw version
#db# Prox/RFID mark3 RFID instrument
#db# bootrom: svn 816 2013-10-11 22:09:42
#db# os: svn 816 2013-10-11 22:09:43
#db# FPGA image built on 2012/ 1/ 6 at 15:27:56
uC: AT91SAM7S256 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 256K bytes
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
proxmark3> hw tune
#db# Measuring antenna characteristics, please wait...
#db# Measuring complete, sending report back to host
# LF antenna: 0.00 V @ 125.00 kHz
# LF antenna: 0.00 V @ 134.00 kHz
# LF optimal: 0.00 V @ 12000.00 kHz
# HF antenna: 7.28 V @ 13.56 MHz
# Your LF antenna is unusable.
proxmark3> hf 14a read
ATQA : 02 00
UID : ?? ?? ?? ??
SAK : 38 [1]
TYPE : Nokia 6212 or 6131 MIFARE CLASSIC 4K
ATS : 0d 78 f7 b1 02 4a 43 4f 50 76 32 34 31 27 cc
- TL : length is 13 bytes
- T0 : TA1 is present, TB1 is present, TC1 is present, FSCI is 8
- TA1 : different divisors are NOT supported, DR: [2, 4, 8], DS: [2, 4, 8]
- TB1 : SFGI = 0, FWI = 8
- TC1 : NAD is NOT supported, CID is supported
- HB : 4a 43 4f 50 76 32 34 31
According to http://wiki.radiowar.org/Proxmark3%E5%9B%BA%E4%BB%B6%E5%88%97%E8%A1%A8
firmwares newer than 617 have problems.
Google translated version
Please do not upgrade your firmware to the CDC Proxmark3 version r617 ~ r830 driver's! We found that because the problem will lead to Proxmark3 code appears unable to identify high-frequency card, and 816 will appear after Nested number of keys for 000000000000.
dpavlin@blue:/blue-zfs/FPGA/proxmark/proxmark3$ make flash-all
All instructions below this are for old version of software see http://www.proxmark.org/forum/viewtopic.php?id=1668
http://code.google.com/p/proxmark3/wiki/Compiling je strgan http://www.proxmark.org/forum/post/3244/#p3244
sudo apt-get install build-essential libreadline5 libreadline-dev libusb-0.1-4 libusb-dev libqt4-dev perl pkg-config dpavlin@t61p:/tank/proxmark3$ svn co http://proxmark3.googlecode.com/svn/trunk proxmark3
dpavlin@t61p:/tank/proxmark3/proxmark3$ ./client/flasher -b ./bootrom/obj/bootrom.elf
Loading ELF file './bootrom/obj/bootrom.elf'...
Loading usable ELF segments:
0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
1: V 0x00200000 P 0x00100200 (0x000017a8->0x000017a8) [R X] @0x294
Waiting for Proxmark to appear on USB...
Connected units:
1. SN: ? [004/013]
Found.
Entering bootloader...
(Press and release the button only to abort)
Waiting for Proxmark to reappear on USB....
Connected units:
1. SN: ? [004/014]
Found.
Flashing...
Writing segments for file: ./bootrom/obj/bootrom.elf
0x00100000..0x001001ff [0x200 / 2 blocks].. OK
0x00100200..0x001019a7 [0x17a8 / 24 blocks]........................ OK
Resetting hardware...
All done.
Have a nice day!
dpavlin@t61p:/tank/proxmark3/proxmark3$ ./client/flasher ./armsrc/obj/fullimage.elf
Loading ELF file './armsrc/obj/fullimage.elf'...
Loading usable ELF segments:
0: V 0x00102000 P 0x00102000 (0x0000a4bc->0x0000a4bc) [R ] @0xb4
1: V 0x00110000 P 0x00110000 (0x0000ba8c->0x0000ba8c) [R X] @0xa570
2: V 0x00200000 P 0x0011ba8c (0x00000004->0x00000004) [RW ] @0x15ffc
Note: Extending previous segment from 0xba8c to 0xba90 bytes
Waiting for Proxmark to appear on USB...
Connected units:
1. SN: ? [004/015]
Found.
Entering bootloader...
(Press and release the button only to abort)
Waiting for Proxmark to reappear on USB....
Connected units:
1. SN: ChangeMe [004/016]
Found.
Flashing...
Writing segments for file: ./armsrc/obj/fullimage.elf
0x00102000..0x0010c4bb [0xa4bc / 165 blocks]..................................................................................................................................................................... OK
0x00110000..0x0011ba8f [0xba90 / 187 blocks]........................................................................................................................................................................................... OK
Resetting hardware...
All done.
Have a nice day!