Lamobo/BananaPi R1
http://linux‑sunxi.org/Lamobo_R1 

Contents: [Dobrica Pavlinušić's random unstructured stuff]
• Dobrica Pavlinušić's random unstructured stuff (upgrade to unsupported armbian) 
• Dobrica Pavlinušić's random unstructured stuff (u‑boot) 
• Dobrica Pavlinušić's random unstructured stuff (distribution) 
• Dobrica Pavlinušić's random unstructured stuff (kernel) 
• Dobrica Pavlinušić's random unstructured stuff (configure switch) 
• Dobrica Pavlinušić's random unstructured stuff (switch connects all ports on boot) 
• Dobrica Pavlinušić's random unstructured stuff (DSA config on armbian for r1) 
• Dobrica Pavlinušić's random unstructured stuff (uart) 
• Dobrica Pavlinušić's random unstructured stuff (switch) 
• Dobrica Pavlinušić's random unstructured stuff (port mirroring) 
• Dobrica Pavlinušić's random unstructured stuff (usb otg) 
• Dobrica Pavlinušić's random unstructured stuff (usbproxy) 
• Dobrica Pavlinušić's random unstructured stuff (mitm usb otg machine) 
• Dobrica Pavlinušić's random unstructured stuff (original target device) 
• Dobrica Pavlinušić's random unstructured stuff (WiringPi) 
• Dobrica Pavlinušić's random unstructured stuff (TMP75) 
• Dobrica Pavlinušić's random unstructured stuff (userland) 
• Dobrica Pavlinušić's random unstructured stuff (kernel hwmomn lm75 driver) 
• Dobrica Pavlinušić's random unstructured stuff (network performance) 
• Dobrica Pavlinušić's random unstructured stuff (kernel 3.4) 
• Dobrica Pavlinušić's random unstructured stuff (kernel 4.13) 
• Dobrica Pavlinušić's random unstructured stuff (kernel 5.12.7) 

upgrade to unsupported armbian
This board was last supported on jessie, but it's fully supported in upstream so I did upgrade to latest Armbian as of 2021‑05‑29.
u‑boot
sdcard already had u‑boot installed, so I didn't have to touch this in first step. To update
 u‑boot do following:
root@r1:/home/dpavlin# apt install u-boot-sunxi

root@r1:/home/dpavlin# dd conv=fsync,notrunc if=/usr/lib/u-boot/Lamobo_R1/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8
449+1 records in
449+1 records out
460103 bytes (460 kB, 449 KiB) copied, 0.0449233 s, 10.2 MB/s

distribution
First, I did distribution update to stretch and buster and than added
root@r1:/home/dpavlin# cat /etc/apt/sources.list.d/armbian.list
deb http://beta.armbian.com buster main

kernel
and installed latest sunxi kernel image
apt install linux-image-edge-sunxi

After reboot I was greeted with new kernel
root@r1:/home/dpavlin# uname -a
Linux r1 5.12.7-sunxi #trunk.33 SMP Fri May 28 07:03:36 UTC 2021 armv7l GNU/Linux

configure switch
https://www.kernel.org/doc/html/latest/networking/dsa/b53.html 
root@r1:/home/dpavlin# cat /etc/network/interfaces.d/br0
auto br0
iface br0 inet dhcp
#iface br0 inet manual
#       address 192.168.1.1
#       netmask 255.255.255.0
        bridge_ports eth0 wan lan1 lan2 lan3 lan4
        post-up for i in `seq 0 4`; do ip link set up dev lan${i}; done ; ip link set up dev wlan
        bridge_stp off
        bridge_waitport 0
        bridge_fd 0

Ports are (left‑to‑right, looking from back of board starting at edge towards hdmi connector):
br0: port 3(lan1) entered disabled state
br0: port 4(lan2) entered blocking state
br0: port 4(lan2) entered forwarding state
br0: port 4(lan2) entered disabled state
br0: port 5(lan3) entered blocking state
br0: port 5(lan3) entered forwarding state
br0: port 5(lan3) entered disabled state
br0: port 6(lan4) entered blocking state
br0: port 6(lan4) entered forwarding state
br0: port 6(lan4) entered disabled state
br0: port 2(wan) entered blocking state
br0: port 2(wan) entered forwarding state

switch connects all ports on boot
https://github.com/armbian/build/issues/511#issuecomment‑258647387 
DSA config on armbian for r1
• https://github.com/armbian/build/issues/511 
uart
Connect your UART adapter here:
UART0‑RX: J13‑P01
 UART0‑TX: J13‑P02
 GND: J12‑P08
                          GND TX RX
             J12   o  o  o  o  o  o
{SD slot}          o  o  o  o

switch
https://www.mail‑archive.com/netdev@vger.kernel.org/msg150526.html 
port mirroring
https://www.mail‑archive.com/netdev@vger.kernel.org/msg150526.html 
# ingress
      tc qdisc  add dev eth1 handle ffff: ingress
      tc filter add dev eth1 parent ffff:           \
               matchall skip_sw                      \
               action mirred egress mirror           \
               dev eth2
# egress
      tc qdisc add dev eth1 handle 1: root prio
      tc filter add dev eth1 parent 1:               \
               matchall skip_sw                       \
               action mirred egress mirror            \
               dev eth2

usb otg
http://git.rot13.org/?p=usb‑otg;a=summary 
usbproxy
make sure that there are no other usb modules loaded (libcomposite or g_*)
mitm usb otg machine
dpavlin@r1:~/USBProxy$ git remote -v
origin  https://github.com/dominicgs/USBProxy (fetch)
origin  https://github.com/dominicgs/USBProxy (push)

dpavlin@r1:~/USBProxy/src/build$ sudo usb-mitm -l -v 058f -p 6387 -P PacketFilter_MassStorage
Loading plugins from /usr/local/lib/USBProxy/
vendorId=058f
productId=6387
cleaning up /tmp
removing 1
Made directory /tmp/gadget-SOOBVj for gadget
UnblockPassword=
Printing Config data
        Strings: 4
                DeviceProxy: DeviceProxy_LibUSB
                HostProxy: HostProxy_GadgetFS
                productId: 6387
                vendorId: 058f
        Vectors: 1
                Plugins:
                        PacketFilter_StreamLog
                        PacketFilter_MassStorage
Pointer: 1
                PacketFilter_StreamLog::file: 0xb6d779f0
Device: 12 01 00 02 00 00 00 40 8f 05 87 63 00 01 01 02 03 01
  Manufacturer: JetFlash
  Product:      Mass Storage Device
  Serial:       GUYOBHDU
        *Config(1): 09 02 20 00 01 01 00 80 32
                Interface(0):
                        *Alt(0): 09 04 00 00 02 08 06 50 00
                                EP(01): 07 05 01 02 00 02 00
                                EP(82): 07 05 82 02 00 02 00
HS Qualifier: 0a 06 00 02 00 00 00 40 01 00
         Config(1): 09 07 20 00 01 01 00 80 32
                Interface(0):
                        *Alt(0): 09 04 00 00 02 08 06 50 00
                                EP(01): 07 05 01 02 40 00 00
                                EP(82): 07 05 82 02 40 00 00
searching in [/tmp/gadget-SOOBVj]
Starting injector thread (14796) for [Injector].
Injector In FD[1/1]: 3
Starting setup writer thread (14799) for EP00.
Starting setup reader thread (14797) for EP00.
[80 06 00 03 00 00 ff 00]
[80 06 00 03 00 00 04 00]: 04 03 09 04
[80 06 02 03 09 04 ff 00]
[80 06 02 03 09 04 28 00]:
        28 03 4d 00 61 00 73 00 73 00 20 00 53 00 74 00 6f 00 72 00 61 00 67 00 65 00 20 00 44 00 65 00
        76 00 69 00 63 00 65 00
[80 06 01 03 09 04 ff 00]
[80 06 01 03 09 04 12 00]: 12 03 4a 00 65 00 74 00 46 00 6c 00 61 00 73 00 68 00
[80 06 03 03 09 04 ff 00]
[80 06 03 03 09 04 12 00]: 12 03 47 00 55 00 59 00 4f 00 42 00 48 00 44 00 55 00
[00 09 01 00 00 00 00 00]
Opened EP01
Opened EP82
Starting writer thread (14802) for EP01.
Starting reader thread (14803) for EP82.
Starting writer thread (14804) for EP82.
Starting reader thread (14801) for EP01.
[a1 fe 00 00 00 00 01 00]
[a1 fe 00 00 00 00 00 00]
01[31]: 55 53 42 43 01 00 00 00 24 00 00 00 80 00 06 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
CBW: (12), tag: 01 00 00 00

[80 06 03 03 09 04 ff 00]
[80 06 03 03 09 04 12 00]: 12 03 47 00 55 00 59 00 4f 00 42 00 48 00 44 00 55 00
[00 09 01 00 00 00 00 00]

original target device
dpavlin@nuc:~$ journalctl -t kernel -f
Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: new high-speed USB device number 45 using xhci_hcd
Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: New USB device found, idVendor=058f, idProduct=6387
Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: Product: Mass Storage Device
Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: Manufacturer: JetFlash
Sep 01 11:10:04 nuc kernel: usb 2-4.4.2: SerialNumber: GUYOBHDU
Sep 01 11:10:04 nuc kernel: usb-storage 2-4.4.2:1.0: USB Mass Storage device detected
Sep 01 11:10:04 nuc kernel: scsi host5: usb-storage 2-4.4.2:1.0

# BUT!

dpavlin@nuc:~$ sudo fdisk -l /dev/sdb
fdisk: cannot open /dev/sdb: No medium found

WiringPi
dpavlin@r1:~/BPI-WiringPi2$ git remote -v
lanefu  https://github.com/lanefu/WiringOtherPi (fetch)
lanefu  https://github.com/lanefu/WiringOtherPi (push)
origin  https://github.com/BPI-SINOVOIP/BPI-WiringPi2 (fetch)
origin  https://github.com/BPI-SINOVOIP/BPI-WiringPi2 (push)

dpavlin@r1:~/BPI-WiringPi2$ gpio readall
 +-----+-----+----------+------+---+-Orange Pi+---+---+------+---------+-----+--+
 | BCM | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | BCM |
 +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+
 |     |     |     3.3v |      |   |  1 || 2  |   |      | 5v       |     |     |
 |  12 |   8 |    SDA.0 |   IN | 0 |  3 || 4  |   |      | 5V       |     |     |
 |  11 |   9 |    SCL.0 |   IN | 0 |  5 || 6  |   |      | 0v       |     |     |
 |   6 |   7 |   GPIO.7 |   IN | 0 |  7 || 8  | 0 | IN   | TxD3     | 15  | 13  |
 |     |     |       0v |      |   |  9 || 10 | 0 | IN   | RxD3     | 16  | 14  |
 |   1 |   0 |     RxD2 |   IN | 0 | 11 || 12 | 0 | IN   | GPIO.1   | 1   | 110 |
 |   0 |   2 |     TxD2 |   IN | 0 | 13 || 14 |   |      | 0v       |     |     |
 |   3 |   3 |     CTS2 |   IN | 0 | 15 || 16 | 0 | IN   | GPIO.4   | 4   | 68  |
 |     |     |     3.3v |      |   | 17 || 18 | 0 | IN   | GPIO.5   | 5   | 71  |
 |  64 |  12 |     MOSI |   IN | 0 | 19 || 20 |   |      | 0v       |     |     |
 |  65 |  13 |     MISO |   IN | 0 | 21 || 22 | 0 | IN   | RTS2     | 6   | 2   |
 |  66 |  14 |     SCLK |   IN | 0 | 23 || 24 | 0 | IN   | CE0      | 10  | 67  |
 |     |     |       0v |      |   | 25 || 26 | 0 | IN   | GPIO.11  | 11  | 21  |
 |  19 |  30 |    SDA.1 |   IN | 0 | 27 || 28 | 0 | IN   | SCL.1    | 31  | 18  |
 |   7 |  21 |  GPIO.21 |   IN | 0 | 29 || 30 |   |      | 0v       |     |     |
 |   8 |  22 |  GPIO.22 |   IN | 0 | 31 || 32 | 0 | IN   | RTS1     | 26  | 200 |
 |   9 |  23 |  GPIO.23 |   IN | 0 | 33 || 34 |   |      | 0v       |     |     |
 |  10 |  24 |  GPIO.24 |   IN | 0 | 35 || 36 | 0 | IN   | CTS1     | 27  | 201 |
 |  20 |  25 |  GPIO.25 |   IN | 0 | 37 || 38 | 0 | IN   | TxD1     | 28  | 198 |
 |     |     |       0v |      |   | 39 || 40 | 0 | IN   | RxD1     | 29  | 199 |
 +-----+-----+----------+------+---+----++----+---+------+----------+-----+-----+
 | BCM | wPi |   Name   | Mode | V | Physical | V | Mode | Name     | wPi | BCM |
 +-----+-----+----------+------+---+-Orange Pi+---+------+----------+-----+-----+

TMP75
root@r1:/etc/telegraf# i2cdetect -y 1
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          -- -- -- -- -- -- -- -- -- -- -- -- -- 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- -- 49 -- -- -- -- -- -- 
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- -- --                         

userland
• https://github.com/ManuelSchneid3r/RaspberryPi/blob/master/sensors/src/tmp.c 
dpavlin@r1:~$ cc tmp.c -o tmp -lm
dpavlin@r1:~$ sudo ./tmp /dev/i2c-1 0x49
21.5

kernel hwmomn lm75 driver
root@r1:~# echo lm75 0x49 > /sys/bus/i2c/devices/i2c-1/new_device 

root@r1:~# dmesg | tail -2
[68352.599623] lm75 1-0049: hwmon1: sensor 'lm75'
[68352.599719] i2c i2c-1: new_device: Instantiated device lm75 at 0x49

root@r1:/sys/bus/i2c/devices/i2c-1# sensors
sun4i_ts-isa-0000
Adapter: ISA adapter
SoC temperature:  +44.4°C  

lm75-i2c-1-49
Adapter: mv64xxx_i2c adapter
temp1:        +22.0°C  (high = +80.0°C, hyst = +75.0°C)

network performance
kernel 3.4
root@r1:~# uname -a
Linux r1 3.4.113-sun7i #23 SMP PREEMPT Wed Jun 14 23:57:45 CEST 2017 armv7l GNU/Linux

root@r1:~# iperf3 --reverse --client nuc
Connecting to host nuc, port 5201
Reverse mode, remote host nuc is sending
[  4] local 192.168.3.238 port 58203 connected to 192.168.3.40 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   107 MBytes   897 Mbits/sec                  
[  4]   1.00-2.00   sec   110 MBytes   923 Mbits/sec                  
[  4]   2.00-3.00   sec   111 MBytes   935 Mbits/sec                  
[  4]   3.00-4.00   sec   107 MBytes   894 Mbits/sec                  
[  4]   4.00-5.00   sec   111 MBytes   927 Mbits/sec                  
[  4]   5.00-6.00   sec   110 MBytes   922 Mbits/sec                  
[  4]   6.00-7.00   sec   111 MBytes   928 Mbits/sec                  
[  4]   7.00-8.00   sec   111 MBytes   935 Mbits/sec                  
[  4]   8.00-9.00   sec   111 MBytes   928 Mbits/sec                  
[  4]   9.00-10.00  sec   111 MBytes   931 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  1.08 GBytes   924 Mbits/sec  147             sender
[  4]   0.00-10.00  sec  1.07 GBytes   922 Mbits/sec                  receiver

iperf Done.

root@r1:~# iperf3 --client nuc
Connecting to host nuc, port 5201
[  4] local 192.168.3.238 port 58205 connected to 192.168.3.40 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec  51.3 MBytes   428 Mbits/sec    0    239 KBytes       
[  4]   1.00-2.01   sec  52.5 MBytes   436 Mbits/sec    0    240 KBytes       
[  4]   2.01-3.02   sec  52.5 MBytes   436 Mbits/sec    0    245 KBytes       
[  4]   3.02-4.01   sec  50.0 MBytes   424 Mbits/sec    0    246 KBytes       
[  4]   4.01-5.02   sec  51.2 MBytes   429 Mbits/sec    0    247 KBytes       
[  4]   5.02-6.02   sec  52.5 MBytes   439 Mbits/sec    0    250 KBytes       
[  4]   6.02-7.03   sec  51.2 MBytes   427 Mbits/sec    0    253 KBytes       
[  4]   7.03-8.00   sec  48.8 MBytes   418 Mbits/sec    0    256 KBytes       
[  4]   8.00-9.02   sec  52.5 MBytes   432 Mbits/sec    0    256 KBytes       
[  4]   9.02-10.01  sec  51.2 MBytes   435 Mbits/sec    0    256 KBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.01  sec   514 MBytes   431 Mbits/sec    0             sender
[  4]   0.00-10.01  sec   514 MBytes   431 Mbits/sec                  receiver

kernel 4.13
root@r1:~# uname -a
Linux r1 4.13.10-sunxi #57 SMP Mon Oct 30 00:08:27 CET 2017 armv7l GNU/Linux

root@r1:~# iperf3 --client nuc
Connecting to host nuc, port 5201
[  4] local 192.168.3.238 port 59520 connected to 192.168.3.40 port 5201
[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd
[  4]   0.00-1.00   sec  67.9 MBytes   567 Mbits/sec    0    765 KBytes       
[  4]   1.00-2.01   sec  82.1 MBytes   687 Mbits/sec    0    840 KBytes       
[  4]   2.01-3.01   sec  65.7 MBytes   547 Mbits/sec    0   1.13 MBytes       
[  4]   3.01-4.02   sec  80.0 MBytes   669 Mbits/sec    0   1.13 MBytes       
[  4]   4.02-5.00   sec  76.2 MBytes   648 Mbits/sec    0   1.24 MBytes       
[  4]   5.00-6.00   sec  81.2 MBytes   681 Mbits/sec    0   1.24 MBytes       
[  4]   6.00-7.06   sec  82.5 MBytes   656 Mbits/sec    0   1.33 MBytes       
[  4]   7.06-8.00   sec  80.0 MBytes   712 Mbits/sec    0   1.33 MBytes       
[  4]   8.00-9.00   sec  78.8 MBytes   659 Mbits/sec    0   1.61 MBytes       
[  4]   9.00-10.00  sec  83.8 MBytes   702 Mbits/sec    0   2.08 MBytes       
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec   778 MBytes   653 Mbits/sec    0             sender
[  4]   0.00-10.00  sec   775 MBytes   650 Mbits/sec                  receiver

iperf Done.

root@r1:~# iperf3 --reverse --client nuc
Connecting to host nuc, port 5201
Reverse mode, remote host nuc is sending
[  4] local 192.168.3.238 port 59524 connected to 192.168.3.40 port 5201
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec  98.0 MBytes   822 Mbits/sec                  
[  4]   1.00-2.00   sec   112 MBytes   933 Mbits/sec                  
[  4]   2.00-3.00   sec   107 MBytes   904 Mbits/sec                  
[  4]   3.00-4.00   sec   107 MBytes   898 Mbits/sec                  
[  4]   4.00-5.00   sec   108 MBytes   904 Mbits/sec                  
[  4]   5.00-6.00   sec   108 MBytes   903 Mbits/sec                  
[  4]   6.00-7.00   sec   108 MBytes   904 Mbits/sec                  
[  4]   7.00-8.00   sec   108 MBytes   904 Mbits/sec                  
[  4]   8.00-9.00   sec   108 MBytes   904 Mbits/sec                  
[  4]   9.00-10.00  sec   107 MBytes   899 Mbits/sec                  
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bandwidth       Retr
[  4]   0.00-10.00  sec  1.05 GBytes   900 Mbits/sec   69             sender
[  4]   0.00-10.00  sec  1.05 GBytes   898 Mbits/sec                  receiver

kernel 5.12.7
dpavlin@r1:~$ uname -a
Linux r1 5.12.7-sunxi #trunk.33 SMP Fri May 28 07:03:36 UTC 2021 armv7l GNU/Linux

dpavlin@r1:~$ iperf3 -c nuc
Connecting to host nuc, port 5201
[  5] local 192.168.3.238 port 50136 connected to 192.168.3.40 port 5201
[ ID] Interval           Transfer     Bitrate         Retr  Cwnd
[  5]   0.00-1.02   sec  41.9 MBytes   346 Mbits/sec    0    239 KBytes
[  5]   1.02-2.02   sec  53.8 MBytes   448 Mbits/sec    0    266 KBytes
[  5]   2.02-3.00   sec  42.5 MBytes   363 Mbits/sec    0    266 KBytes
[  5]   3.00-4.02   sec  53.8 MBytes   445 Mbits/sec    0    277 KBytes
[  5]   4.02-5.01   sec  53.8 MBytes   456 Mbits/sec    0    325 KBytes
[  5]   5.01-6.02   sec  48.1 MBytes   400 Mbits/sec    0    386 KBytes
[  5]   6.02-7.03   sec  48.8 MBytes   405 Mbits/sec    0    386 KBytes
[  5]   7.03-8.00   sec  46.2 MBytes   397 Mbits/sec    0    386 KBytes
[  5]   8.00-9.02   sec  53.8 MBytes   443 Mbits/sec    0    393 KBytes
[  5]   9.02-10.00  sec  51.2 MBytes   438 Mbits/sec    0    393 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.00  sec   494 MBytes   414 Mbits/sec    0             sender
[  5]   0.00-10.01  sec   494 MBytes   414 Mbits/sec                  receiver

iperf Done.
dpavlin@r1:~$ iperf3 -R -c nuc
Connecting to host nuc, port 5201
Reverse mode, remote host nuc is sending
[  5] local 192.168.3.238 port 50140 connected to 192.168.3.40 port 5201
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.01   sec  66.9 MBytes   559 Mbits/sec
[  5]   1.01-2.00   sec  69.8 MBytes   588 Mbits/sec
[  5]   2.00-3.00   sec  66.8 MBytes   560 Mbits/sec
[  5]   3.00-4.00   sec  67.6 MBytes   567 Mbits/sec
[  5]   4.00-5.00   sec  67.6 MBytes   568 Mbits/sec
[  5]   5.00-6.00   sec  65.3 MBytes   548 Mbits/sec
[  5]   6.00-7.00   sec  66.5 MBytes   558 Mbits/sec
[  5]   7.00-8.00   sec  65.4 MBytes   549 Mbits/sec
[  5]   8.00-9.00   sec  66.7 MBytes   560 Mbits/sec
[  5]   9.00-10.00  sec  65.2 MBytes   547 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate         Retr
[  5]   0.00-10.01  sec   672 MBytes   563 Mbits/sec   57             sender
[  5]   0.00-10.00  sec   668 MBytes   560 Mbits/sec                  receiver

iperf Done.