Because of all reasons documented here I'm no longer using Asterisk but CodeWeaver

Fritz PCI ISDN

• get Fritz driver from http://www.avm.de/ftp/cardware/fritzcrd.pci/linux/ and use http://sifnt.net.au/files/asterisk/fritz-linux-2.6.17.patch to compile it on recent kernels (original instructions)

• Use latest CAPI driver from subversion:

svn co svn://svn.chan-capi.org/chan-capi/trunk chan-capi-trunk

Version 1.0.1 has problems with fcpci, so don't use it!

• Than follow more-or-less instructions on this page

Motorola 62802 (SM65) winmodem

dpavlin@brr:~$ lspci -v -s 04
05:04.0 Communication controller: Motorola Wildcard X100P
        Subsystem: Motorola Unknown device 0002
        Flags: bus master, medium devsel, latency 32, IRQ 10
        I/O ports at 1000 [size=256]
        Memory at f0500000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>

Compilation

http://www.asterisk.org/developers/get-source

zaptel

apt-get install libnewt-dev

svn co http://svn.digium.com/svn/zaptel/trunk zaptel

cd zaptel
./configure
make menuconfig
make
sudo make install
sudo make config
cd -

libbri

Not needed for Motorola card above

# svn co http://svn.digium.com/svn/libpri/trunk libpri

asterisk

svn co http://svn.digium.com/svn/asterisk/trunk asterisk
./configure
make
sudo make install
sudo make samples