This page tries to collect links about 433 devices that I collected over time

First, try to decode signals using rtl-sdr and https://github.com/merbanan/rtl_433 (if it's temperature sensor, and even if it's not you can use -a option to analyze signals)

OOK

• http://lucsmall.com/2012/04/29/weather-station-hacking-part-2/
• http://lucsmall.com/2013/12/19/weather-updates/
• https://github.com/lucsmall/BetterWH2

Simpler and better example using interrupts: http://forum.arduino.cc/index.php?topic=145341.0

Prologue temperature sensor

dpavlin@x200:/rest/cvs/rtl_433/build$ ./src/rtl_433 -a
Registering protocol[01] Rubicson Temperature Sensor
Registering protocol[02] Prologue Temperature Sensor
Registering protocol[03] Silvercrest Remote Control
Registering protocol[04] ELV EM 1000
Registering protocol[05] ELV WS 2000
Registering protocol[06] Waveman Switch Transmitter
Registering protocol[07] Steffen Switch Transmitter
Registering protocol[08] Acurite 5n1 Weather Station
Found 1 device(s):
  0:  Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Terratec T Stick PLUS
usb_claim_interface error -6
Failed to open rtlsdr device #0.
dpavlin@x200:/rest/cvs/rtl_433/build$ ./src/rtl_433 -a
Registering protocol[01] Rubicson Temperature Sensor
Registering protocol[02] Prologue Temperature Sensor
Registering protocol[03] Silvercrest Remote Control
Registering protocol[04] ELV EM 1000
Registering protocol[05] ELV WS 2000
Registering protocol[06] Waveman Switch Transmitter
Registering protocol[07] Steffen Switch Transmitter
Registering protocol[08] Acurite 5n1 Weather Station
Found 1 device(s):
  0:  Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Terratec T Stick PLUS
Found Elonics E4000 tuner
Exact sample rate is: 250000.000414 Hz
Sample rate set to 250000.
Sample rate decimation set to 0. 250000->250000
Bit detection level set to 10000.
Tuner gain set to Auto.
Reading samples in async mode...
Tuned to 433920000 Hz.
*** signal_start = 2410789, signal_end = 2643271
signal_len = 232482,  pulses = 262
Iteration 1. t: 164    min: 156 (169)    max: 173 (93)    delta 725
Iteration 2. t: 162    min: 154 (134)    max: 171 (128)    delta 8
Iteration 3. t: 162    min: 154 (127)    max: 171 (135)    delta 0
Distance coding: Pulse length 162

Short distance: 443, long distance: 936, packet distance: 2255

p_limit: 162

[00] {38} 17 06 03 64 80 : 00010111 00000110 00000011 01100100 10000000
[01] {36} 5c 18 0d 92 00 : 01011100 00011000 00001101 10010010 00000000
[02] {36} 5c 18 0d 92 00 : 01011100 00011000 00001101 10010010 00000000
[03] {36} 5c 18 0d 92 00 : 01011100 00011000 00001101 10010010 00000000
[04] {36} 5c 18 0d 92 00 : 01011100 00011000 00001101 10010010 00000000
[05] {36} 5c 18 0d 92 00 : 01011100 00011000 00001101 10010010 00000000
[06] {36} 5c 18 0d 92 00 : 01011100 00011000 00001101 10010010 00000000
[07] {0} 00 : 00000000

Sensor temperature event:
protocol      = Prologue
button        = 0
battery       = Ok
temp          = 21.7
humidity      = 32
channel       = 1
id            = 5
rid           = 193
hrid          = c1
5c 18 0d 92 00

RSLR3

Wall socket with RSLR3 protocol:

• http://www.conrad.hr/Be%26%23382;i%26%23269;ni-ugradbeni-prekida%26%23269;-RSLR3.htm?websale8=conrad-hr&pi=640303&ci=SHOP_AREA_260554_2806092
• 640303-an-01-ml-FUNK_EINBAUSCHALTER_RSLR3_de_en_fr_nl.pdf

Some information how to pair it

• http://forums.ninjablocks.com/index.php?p=/discussion/269/pairing-conrad-rsl-actuators/p1
• http://www.mikrocontroller.net/topic/252895

[2 Bit = '10'][2 Bit = Tasten 1 bis 4][2Bit = Ein/Ausschalten][2 Bit = 
Wahlschalter 1 bis 4][24 Bit = "Fernsteuerungs ID"]

1.1 AN
10110110110100101011100111000000
1.1 AUS
10111110110100101011100111000000

1.2 AN
10001110110100101011100111000000
1.2 AUS
10000001110100101011100111000000

1.3 AN
10100110110100101011100111000000
1.3 AUS
10101110110100101011100111000000

1.4 AN
10010110110100101011100111000000
1.4 AUS
10011110110100101011100111000000


2.1 AN
10111001110100101011100111000000
2.1 AUS
10110101110100101011100111000000

2.2 AN
10000101110100101011100111000000
2.2 AUS
10001101110100101011100111000000

2.3 AN
10101001110100101011100111000000
2.3 AUs
10100101110100101011100111000000

2.4 AN
10011001110100101011100111000000
2.4 AUS
10010101110100101011100111000000


3.1 AN
10110000110100101011100111000000
3.1 AUS
10111000110100101011100111000000

3.2 AN
10001000110100101011100111000000
3.2 AUS
10000100110100101011100111000000

3.3 AN
10100000110100101011100111000000
3.3 AUS
10101000110100101011100111000000

3.4 AN
10010000110100101011100111000000
3.4 AUS
10011000110100101011100111000000


4.1 AN
10111100110100101011100111000000
4.1 AUS
10110010110100101011100111000000

4.2 AN
10000010110100101011100111000000
4.2 AUS
10001010110100101011100111000000

4.3 AN
10101100110100101011100111000000
4.3 AUS
10100010110100101011100111000000

4.4 AN
10011100110100101011100111000000
4.4 AUS
10010010110100101011100111000000


ALLE AN
10010011110100101011100111000000
ALLE AUS
10100011110100101011100111000000


Kleine Fernbedienung

An
10111001010010000100101011000000
AUS
10110101010010000100101011000000

Power sockets

• http://www.conrad.hr/%26%23268;etverodijelni-komplet-be%26%23382;i%26%23269;nih-prekida%26%23269;a-433-MHz.htm?websale8=conrad-hr&pi=640475&ci=SHOP_AREA_260547_0806012
• 640475-an-01-ml-FUNK_SCHALTER_SET_4TEILIG_de_en_fr_nl.pdf

Send/receive using USB sound card

• http://rurandom.org/justintime/index.php?title=Cheapest_ever_433_Mhz_transceiver_for_PCs
• https://www.tablix.org/~avian/blog/archives/2011/10/receiver_module_follow_up/

Open the watch

https://www.youtube.com/watch?v=kOKDaPp8oiY

Mailing list

https://groups.google.com/forum/#!forum/ti-chronos-development-

Watch

OpenChronos

https://github.com/poelzi/OpenChronos/

dpavlin@blue:/blue-raidz1/MSP430/Chronos$ git clone git@github.com:poelzi/OpenChronos.git
Cloning into 'OpenChronos'...
remote: Counting objects: 1639, done.
remote: Compressing objects: 100% (907/907), done.
remote: Total 1639 (delta 921), reused 1321 (delta 671)
Receiving objects: 100% (1639/1639), 1.02 MiB | 330.00 KiB/s, done.
Resolving deltas: 100% (921/921), done.
Checking connectivity... done
dpavlin@blue:/blue-raidz1/MSP430/Chronos$ cd OpenChronos/
dpavlin@blue:/blue-raidz1/MSP430/Chronos/OpenChronos$ 

outdated

openchronos-ng

http://sourceforge.net/p/openchronos-ng/

dpavlin@blue:/blue-raidz1/MSP430/Chronos$ git clone git://git.code.sf.net/p/openchronos-ng/code openchronos-ng-code
Cloning into 'openchronos-ng-code'...
remote: Counting objects: 4088, done.
remote: Compressing objects: 100% (1961/1961), done.
remote: Total 4088 (delta 2930), reused 2831 (delta 2036)
Receiving objects: 100% (4088/4088), 1.31 MiB | 627.00 KiB/s, done.
Resolving deltas: 100% (2930/2930), done.
Checking connectivity... done
dpavlin@blue:/blue-raidz1/MSP430/Chronos$ ls
OpenChronos  openchronos-ng-code
dpavlin@blue:/blue-raidz1/MSP430/Chronos$ cd openchronos-ng-code/
dpavlin@blue:/blue-raidz1/MSP430/Chronos/openchronos-ng-code$ sudo apt-get install python-urwid
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following NEW packages will be installed:
  python-urwid
0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded.
Need to get 731 kB of archives.
After this operation, 2,697 kB of additional disk space will be used.
Get:1 http://ftp.hr.debian.org/debian/ sid/main python-urwid amd64 1.1.1-1+b1 [731 kB]
Fetched 731 kB in 0s (848 kB/s)      
Selecting previously unselected package python-urwid.
(Reading database ... 274572 files and directories currently installed.)
Unpacking python-urwid (from .../python-urwid_1.1.1-1+b1_amd64.deb) ...
Setting up python-urwid (1.1.1-1+b1) ...


# turn off acleration module which breaks build

dpavlin@blue:/blue-raidz1/MSP430/Chronos/openchronos-ng-code$ make config
grep: config.h: No such file or directory
/usr/bin/python2 tools/config.py

/usr/bin/python2 tools/make_modinit.py


# build

dpavlin@blue:/blue-raidz1/MSP430/Chronos/openchronos-ng-code$ make
Generating dependencies..
/bin/sh: 1: makedepend: not found
CC modinit.c
-e 
>> Building openchronos.elf as target RELEASE
/usr/bin/python2 tools/memory.py -i openchronos.elf -o openchronos.txt
ELF section .text at 0x8000 14972 bytes
ELF section .rodata at 0xba7c 512 bytes
ELF section .data at 0xbc7c 216 bytes
ELF section .vectors at 0xff80 128 bytes
convert to TI Hex

Links

http://processors.wiki.ti.com/index.php/EZ430-Chronos

AP dongle BM-USBD4-V1.1

New, white one with M430F5509 and CC1101

http://www.ti.com/product/msp430f5509

[33569.199972] usb 3-1.2.3: USB disconnect, device number 7
[38564.358606] usb 3-1.1: new full-speed USB device number 8 using ehci-pci
[38564.453766] usb 3-1.1: New USB device found, idVendor=2047, idProduct=0340
[38564.453780] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[38564.453783] usb 3-1.1: Product: eZ430-ChronosAP
[38564.453785] usb 3-1.1: Manufacturer: Texas Instruments
[38564.453787] usb 3-1.1: SerialNumber: F5BF93460A000B00
[38564.466959] cdc_acm 3-1.1:1.0: This device cannot do calls on its own. It is not a modem.
[38564.466984] cdc_acm 3-1.1:1.0: ttyACM0: USB ACM device
[38564.467400] usbcore: registered new interface driver cdc_acm
[38564.467402] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

Debugger MSP-eZ430U

[47106.422402] usb 3-1.1: new full-speed USB device number 10 using ehci-pci
[47106.537358] usb 3-1.1: New USB device found, idVendor=0451, idProduct=f432
[47106.537363] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[47106.537366] usb 3-1.1: Product: Texas Instruments MSP-FET430UIF
[47106.537369] usb 3-1.1: Manufacturer: Texas Instruments
[47106.537371] usb 3-1.1: SerialNumber: EDFF41CE960B3D18
[47106.543217] cdc_acm 3-1.1:1.0: This device cannot do calls on its own. It is not a modem.
[47106.543222] cdc_acm 3-1.1:1.0: No union descriptor, testing for castrated device
[47106.543241] cdc_acm 3-1.1:1.0: ttyACM0: USB ACM device
[47109.197929] hid-generic 0003:0451:F432.0004: hiddev0,hidraw3: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1a.0-1.1/input1
[47109.548548] usb 3-1.1: USB disconnect, device number 10
[47110.260115] usb 3-1.1: new full-speed USB device number 11 using ehci-pci
[47110.375589] usb 3-1.1: New USB device found, idVendor=0451, idProduct=f432
[47110.375594] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[47110.375597] usb 3-1.1: Product: Texas Instruments MSP-FET430UIF
[47110.375599] usb 3-1.1: Manufacturer: Texas Instruments
[47110.375601] usb 3-1.1: SerialNumber: EDFF41CE960B3D18
[47110.381368] cdc_acm 3-1.1:1.0: This device cannot do calls on its own. It is not a modem.
[47110.381373] cdc_acm 3-1.1:1.0: No union descriptor, testing for castrated device
[47110.381399] cdc_acm 3-1.1:1.0: ttyACM0: USB ACM device
[47120.132638] hid-generic 0003:0451:F432.0005: hiddev0,hidraw3: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1a.0-1.1/input1
[47303.482869] usb 3-1.1: USB disconnect, device number 11
[47304.191698] usb 3-1.1: new full-speed USB device number 12 using ehci-pci
[47304.306763] usb 3-1.1: New USB device found, idVendor=0451, idProduct=f432
[47304.306767] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[47304.306770] usb 3-1.1: Product: Texas Instruments MSP-FET430UIF
[47304.306772] usb 3-1.1: Manufacturer: Texas Instruments
[47304.306774] usb 3-1.1: SerialNumber: EDFF41CE960B3D18
[47304.312539] cdc_acm 3-1.1:1.0: This device cannot do calls on its own. It is not a modem.
[47304.312554] cdc_acm 3-1.1:1.0: No union descriptor, testing for castrated device
[47304.312575] cdc_acm 3-1.1:1.0: ttyACM0: USB ACM device
[47314.353996] hid-generic 0003:0451:F432.0006: usb_submit_urb(ctrl) failed: -1
[47314.354020] hid-generic 0003:0451:F432.0006: timeout initializing reports
[47314.354185] hid-generic 0003:0451:F432.0006: hiddev0,hidraw3: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1a.0-1.1/input1

• debugging with MSP-eZ430U directly? http://e2e.ti.com/support/low_power_rf/f/155/p/252352/1011359.aspx#1011359
• remove battery when debugging? http://e2e.ti.com/support/microcontrollers/msp430/f/166/t/265185.aspx

sending data

https://github.com/ApertureLabsLtd/ChronIC